The toilet is not watering, and the tank is empty

The problem you're talking about isn't complicated at all, as long as you do the following:

1.You have to make sure that there is running water, and turn on the tap water switch, which is the angle valve

2.Press the lid of the water tank to open it, and you can see the accessories inside the water tank The toilet tank accessories are generally divided into three parts, the first is the drain valve, which is directly below the lid button The second is the water inlet valve, which is outside the toilet.

The hose that is connected next to the drain valve and the third one is the button

3 Check that after the toilet lid is closed, will it reach the inlet valve? If so, reorient the inlet valve.

Just look at the floating bucket or float of the inlet valve to see if it can move up and down freely? This is the key because of the card.

If you get there, the water won't get in, and the floating bucket usually has an adjustable crosseye that can be adjusted to adjust the floating bucket.

height, you rotate in the direction of the clock, and the problem should be solved

Your toilet is newly installed The current toilet has been tested before leaving the factory It is unlikely that the inlet valve is bad It is mainly caused by improper installation by the installer You can do it yourself If you still don't understand, you can send me a message My Taobao store: Xitao Taobao bathroom home.

Open the toilet lid, there is a floating device, a simple look at it, you can understand.