How to maintain the dust removal fan in the industrial furniture factory

The daily maintenance of dust removal fans in industrial furniture factories can usually be understood as the daily routine and the weekly routine maintenance, and the following is a brief explanation of the daily routine and the weekly routine maintenance

What are the main details of the routine maintenance on the day and some details to pay attention to, so as to effectively play the role of dust removal.

On the same day, the routine maintenance is carried out by the workers who operate the dust removal equipment of the industrial furniture factory on duty, and conscientiously do four things of mechanical design and manufacturing before the class, five things in the class and four things after the class.

Check whether the handle position and manual operation part are correct and flexible, and whether the safety device is reliable. Low-speed operation to check whether the transmission is normal and whether the lubrication and cooling are smooth.

2) When the dust removal fan is running, the operator pays attention to the operation sound, whether the temperature, pressure, liquid level, electro-hydraulic mechanical gas, hydraulic, and air pressure system of the industrial dust removal equipment are normal.

3) There are four things that the operator needs to do when he gets off work: turn off the switch, and put all the handles of mechanical science and technology to the zero position. Remove iron filings and dirt, wipe the oil stains on the guide rail surface and sliding surface of the equipment, and add oil.

Clean the work site, organize accessories and tools. Fill in the handover record and the operation desk time record, and go through the handover procedures.

The lubrication system of the dust removal fan should be checked frequently: the lubrication system of the dust removal fan needs to be checked frequently, to see whether the oil storage capacity in the oil tank is lower than the minimum graduation line, if the oil is insufficient, please refuel. It is also necessary to see whether the oil is mixed with water and other dirt and deteriorates, if it deteriorates, please change the oil in time.

The oil filter also needs to be cleaned frequently, and whether the dripping condition of the drip nozzle is normal, if the drip nozzle is dirty, you can remove the adjustment screw for cleaning. These inspections of the lubrication system can be done by the average user themselves.

Environmental protection dust fan maintenance work steps:

1. The use environment should always be kept clean and tidy, the surface of the environmental protection dust removal fan should be kept clean, and there should be no sundries at the air inlet and outlet. Regularly remove dust and other debris in the fan and pipe.

2. It can only be operated under the condition that the environmental protection dust removal fan is completely in gear, and at the same time, the capacity of the power supply facilities should be kept sufficient, the voltage is stable, and the lack of phase operation is strictly prohibited.

3. During the operation of the environmental protection dust removal fan, if it is found that the fan has abnormal sound, the motor is seriously heated, the shell is electrified, the switch trips, and cannot be started, it should be stopped immediately for inspection. In order to ensure safety, maintenance is not allowed during the operation of the environmental protection dust removal fan. After overhaul, test operation should be carried out for about five minutes to confirm that there is no abnormal phenomenon before starting the operation.

Environmentally friendly dust removal fan.

4. According to the use of environmental conditions, the bearing is supplemented or replaced with grease from time to time (the motor enclosed bearing does not have to replace the grease during the service life), in order to ensure the good lubrication of the fan during operation, the number of refueling is not less than 1000 hours, the enclosed bearing and the motor bearing, and the refueling is filled with ZL 3 lithium lubricating grease 2 3 of the inner and outer rings of the bearing. It is strictly forbidden to run without oil.

5. The environmental protection dust removal fan should be stored in a dry environment to avoid moisture in the motor. When the environmental protection fan is stored in the open air, there should be rainproof measures. In the process of storage and handling, the fan should be prevented from bumping to avoid damage to the fan.