-
Anonymous users2024-01-24What to do if the smart toilet flushes weakly.
When we use the toilet, if we find that the flushing function is not particularly good, for example, the smart toilet flushes weakly, which will cause the dirt in the toilet to not flush cleanly, so what should we do if the smart toilet flushes weakly? This is also a topic that many people are more concerned about, so I will take you to discuss it today.
Reasons why smart toilets don't flush well:
1. It may be that the water tank is used improperly, for example, there is less water in the water tank, and the ideal pressure cannot be reached when flushing, and the water volume is not enough to meet the requirements. Or the fittings inside the tank are damaged, which will also cause weakness when flushing.
2. It may also be that the pipe has been worn, and there is a lot of dirt inside, and many people may just replace a new smart toilet, but the inner wall of the pipe is blocked in the pipe because there is a lot of dirt, which will also cause the flushing to be slower.
What to do if the smart toilet flushes weakly.
1. First of all, we must ensure that the water in the toilet is full, so that when flushing, we can reach 2 3, or full water, as long as the water is enough, it can effectively solve the problem of weak flushing.
2. If there are many obstructions on the inner wall of the pipeline, in addition to replacing a new smart toilet, the inner wall of the pipeline should be cleaned, especially if there is a lot of dirt or blockage inside the pipeline, it must be removed in time.
3. If the water level of the inlet valve is low, you need to disassemble the entire inlet valve, and then there will be a buckle on it, rotate it counterclockwise, readjust the height of the water level, and then install the buckle, so as to solve the problem of weak flushing of the new smart toilet.
-
Anonymous users2024-01-23Check the water pipe to see if the power is sufficient and if the intelligent system is broken.
-
Anonymous users2024-01-22It's also possible that the teleporter is old or inflexible. Of course, it's also possible that the two places you mentioned are broken. It is recommended that you consult the merchant who sold you. There is no charge.
According to the past few days on the Internet many checks, did not find a reliable way, at first thought that the pipe was blocked, and then knew that the sealing ring leaked, so there is no force in the water, here is a simple way to share with friends who need: "Close the water valve, that is, the water pipe that supplies water to the toilet, turn off the toilet to cut off the water, and then press the flush button of the toilet, let the toilet empty water flush once, and the toilet can generally return to normal" If the above methods are useless, you can only report for repair.
If the toilet is like this at the beginning, it may have been displaced because the hole spacing was not suitable; If it is because it is a long time later, it may be that the sewer pipe is not good, it may be blocked, or there is dirt in the tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling.
That is to adjust the height of the inlet valve ball, the flushing is weak, the new is the water level problem, the old is that the outlet is blocked, and only a part of the water comes out.
It can be sold in the building materials market or in the bathroom market.
On the control panel of the smart toilet, there is a function to adjust the flush pressure. Generally, there are three gears, press +- to adjust.