-
Anonymous users2024-01-24Hello, yes, it is recommended to fill more water and then flush, otherwise the pressure is too small if the water is less, it is not easy to flush down, the toilet at home has been flushed with water in a basin for many years, which is more water-saving.
-
Anonymous users2024-01-23Changing the valve of the tank will do the trick.
-
Anonymous users2024-01-22If you have enough water, you can!
-
Anonymous users2024-01-21A little toilet sanitizer is easy to rinse.
Rinsing with water alone will leave a bad smell.
Hello! 1. Pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the dirt will be brushed off. 2. Sprinkle baking soda in the toilet bowl and brew with hot water for half an hour to brush off the dirt. >>>More
Buy a glass glue and glue gun, put it under the toilet for a week, and wait for the glue to dry. But the bottom of the toilet must be dry when you hit it.
Toilet flushing is generally divided into the following situations: >>>More
It's a very ordinary thing. However, Professor Shepiro, chair of the Department of Mechanical Engineering at the Massachusetts Institute of Technology in the United States, is keenly aware that every time the bath water is released, the swirl of the water always rotates in a counterclockwise direction. >>>More
Is this toilet you're talking about new or has it been used for several years? If it is new, it is either a foreign object left in the pipe during installation, or the performance of the toilet itself, if it has been used for several years, then this is due to the toilet sewer pipe, especially the bend, must have formed a lot of scale, so the reason for the unobstructed drainage, because you use the basin water to flush, the amount of water poured down is more than the water released or the water is poured down"Instantaneous water flow"Big, so it's ok"You make up"Bad flushing. This situation can generally be solved by replacing the toilet or having a professional deal with it.