-
Anonymous users2024-01-23Toilet flushing is generally divided into the following situations:
1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools. Toilet bowl.
2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.
3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.
4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.
5. Squatting pit to toilet: some old houses are installed when building a squatting pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow, and when recreating the toilet, it is best to replace the bottom elbow with a direct bend, if it can't be replaced, then before installing the toilet, it is necessary to do a good job of cleaning up the bottom anti-water bend, and the installation is to avoid letting cement or tile fragments fall in. This kind of squatting toilet should be used with more care.
3. Sewer blockage caused by decoration: This is the most likely occurrence of house decoration, we have met many cases of sewer blockage caused by carelessness during decoration, which is definitely not accidental, so we must take protective measures before decoration. This blockage is generally caused by cement blocks, tile fragments, sediment, paint, woven bags, etc.
If it is a soft object such as a woven bag, you can use a dredge machine to dredge it directly, if it is blocked by a hard object such as cement slag, then you need a professional dredging tool to dredge it.
What to do if the toilet can't be flushed at one time
The solution to the toilet sloppy. >>>More
Generally, the toilet flushes once depends on the volume of the toilet tank, and now the singing is to save water, the new toilet is generally 6 liters of the old toilet has 8 liters or even 12 liters, if you want to save water, you can place a drink bottle or brick in the toilet, in order to reduce the amount of flushing, you can also bend the float inside a little down, you can reduce the water output of the toilet tank.
Go and turn up the float in the tank, that's how I got it done, give me 5 points!
Then buy a water-saving 3-6 liter or even 2-3 liter.
Perhaps there is a problem with the design of the pipeline, if there are similar problems after dredging, it is necessary to find the root cause of the property and other departments. This is not a trivial matter, and it will be difficult to clean up when the urine and urine overflow one day, so we should pay attention to it!!