Urgently ask about the leakage in the bathroom, it has been found to be a waterproof problem, and th

No, it is necessary to remove the bathroom wall and floor tiles as a whole, redo the waterproofing, and then do the closed water experiment, and then restore the tiles. The cost is around 3 thousand.

No, it is necessary to remove the bathroom wall and floor tiles as a whole, redo the waterproofing, do the closed water experiment, and restore the tiles. The cost is around 4 thousand.

After finding the leakage point and repairing it, I don't know if it will work, so I plug the floor drain and release water for 24 hours, and check the top surface of the lower layer to know. If it still leaks, then you have to start anew. Material: floor tile + accessories + labor about 1000 yuan.

Manual scraping of the original floor tiles to remove, toilet basin dismantling and installation.

There are three methods of general repair, one: chisel the ground surface layer around the seepage pipeline, dig out the loose layer in the hole around the pipe through the floor slab, brush off the floating ash, sand and other adhesions around the hole, and rinse it with water. Then use the plugging king to paint, and then brush the flexible waterproof material (such as JS polyurethane) on it after drying

The following high-pressure grouting method, the following injection of water-swelled polyurethane, after drying, remove the water-stopping needle and smooth it with the plugging king Three: fully open the bathroom and make waterproof from the new. The advantage of one or two is that it is fast and the cost is less, and the disadvantage is that it can only ensure that the place is not permeable.

Third, the advantage is to completely solve the disadvantage, which is the long construction period and the high cost.

The question of money is to see how long the warranty lasts.

Each place is not very different, anyway, it is labor cost + tile cost (should be less than 1 yuan a horse) + cement and other material costs, and maybe there are handling costs. It is estimated that it should be in a few hundred dollars.

It can be used with waterproof paint, with acrylic waterproof paint, both indoors and outdoors, and the color is generally white. If applied correctly, it can ensure that there is no water leakage for 10-15 years, and the process of coating is mainly "thin coating many times". Each brush should be thin, divided into 3-5 brushes to complete (each brush should wait for the paint to dry before applying the next time), so as to achieve the desired effect.

If it is with high-pressure grouting, it can last for a period of time, and if it is ordinary filling, the effect is not very large.