-
Anonymous users2024-01-24There are bubbles that the waterproof is not done well, generally the first waterproof is not dry to do the second time, resulting in delamination or the base layer is not dry, resulting in the base layer sticky and not well tightly combined is good.
-
Anonymous users2024-01-23Do you see the blisters popping up or do you have small blisters on the surface after a while! If you soak more, it is estimated that the waterproof is not done, and the waterproof downstairs does not mean that the waterproof is done, it may be that the time has not come or the house is not leaking! Provide free professional technical consultation for concrete waterproof leakage repair.
-
Anonymous users2024-01-22When the waterproof paint is applied, there is air covering it.
-
Anonymous users2024-01-21If there is air in the waterproof layer, bubbles will appear when water is stored.
-
Anonymous users2024-01-20Are you using oily or water-based? I guess it's not dry.
-
Anonymous users2024-01-19This is a normal reaction, and the properties of cement are the same.
Theoretically, there is no problem, the construction process is to do a good job of waterproofing, and then do a closed water test, and then the base surface treatment, putty scraping, primer painting, and then topcoat. However, in reality, the general bathroom is more tiled after waterproofing, because the bathroom needs long-term water, and the indoor will be more humid and more water vapor, if it is painted, then the water vapor may still erode the paint on the wall, and then affect the beauty of the wall, so it is recommended to paste tiles better.
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
1. All the waterproof layer is generally dry for 24 hours, but there are slight differences due to different seasons, temperatures, and ventilation conditions, and the waterproof layer is dried for 48 to 72 hours after the closed water experiment, and there is no problem after you can paste the bricks.
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More