-
Anonymous users2024-01-24The main thing is to make the triangular keel square, straight, and install the integrated plate tightly.
-
Anonymous users2024-01-23If the installation is good, there will be no gaps, and relatively speaking, the quality of the bathroom ceiling must be guaranteed, otherwise the damp and mildew is really ugly. You can go to see this, the performance is relatively strong in all aspects, and it is better to install it at home, and it is very good to see the integrated ceiling of the famous brand of AIA before, and it is very suitable to install it in the bathroom, and the combination modules are more practical.
-
Anonymous users2024-01-22It is recommended to install a lead alloy gusset!
It is recommended to use grout agent to grout the floor tiles in the later stage.
If the main consideration is waterproofing, choose water leakage, wet the gap with water, and dry the powder.
In the past, caulk or white cement were used to repair joints. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean. >>>More
Hello, you are saturated with water on the floor of the bathroom, because the water of your shower only flows into the floor drain on the surface of the brick, and the water seeping under the brick has no place to flow, the reason is that the floor drain pipe is too high and not flat with the ground during the decoration, so the water can not seep into the floor drain. Over time, the water under the bathroom floor will have a peculiar smell and small flying insects. The reason why you can deduct this beautiful seam is because the ground is wet, and the ground must be completely dried before doing beautiful seams. >>>More
In the event of crevice water seepage, check whether there are pressurized pipelines passing through the leakage point and equip parts (pipe hoops, joints, etc.). Then treat it symptomatically.