What should I do if the floor in the bathroom leaks?

Before repairing the toilet leakage, it is necessary to determine the cause of the toilet leakage, and the two methods for judging the causes of water leakage are as follows:

1: The method of judging the water seepage on the ground: as long as the ground uses water, there is a phenomenon of water leakage downstairs, and when the ground does not use water, there is no longer water leakage downstairs.

2: The method of judging the leakage of water pipes: the leakage of water pipes is generally large and continuous; If the bathroom has not used water for several days, but there is still water leakage, and the leakage water has not been reduced, it is a problem with the water pipe.

First, if the bathroom is leaking water from the waterproof layer, not the upper and lower water pipes. They can be repaired without planing tiles.

The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. You can go to the Internet to find 100 million waterproof. Learn more details.

Second, if it is a problem with the upper and lower water pipes. And if the water pipes are underground, you need to consider planing tiles, but you don't have to redecorate the bathroom. For example, if the inlet pipe is leaking, the pipe can be changed to avoid the leaking water pipe.

If it is a leak in the sewer pipe, it is also necessary to find the specific location of the leakage, and according to the situation, it is determined that it is partially planed bricks to solve, and it is not necessary to plane all of them.

Here's how to solve the problem:

1. Treat the dust, oil, and stagnant water on the surface, and keep the surface dry.

2. If the tile joint is filled with caulk, you need to use a knife to draw a small groove; 3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray permeable waterproofing agent, and be sure to spray evenly; 4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the weak links around the pipe root are reinforced; 5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge; 6. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours.

First of all, determine whether it is a leak on the ground or a pipe leak, if you can completely rule out the possibility of leakage of hidden pipes (including water inlet pipes and drainage pipes), you should also pay attention to whether the faucet is leaking at the position of the wall, and it will leak if it is not sealed at the junction of the faucet and the pipe (just a little bit inside the wall tiles). The only way to deal with this situation is to pry the bricks, find the cause of the water leakage, and re-do the waterproofing. What is it like a locust?

Seniors? Weak? Feed the rout

Xiongtuan Pan? Si ?What is the curtain?

Brother suffocates Fuyi, drought, Mu Mu Gorge, Yue Yu, Qu? File annoyance Xin badger G H silk? John for Cape Mutae?

Decadent Tomb Charm Shell? Hate.

Determine whether the cause of the leakage is a waterproof problem or a water pipe problem.

Draining, sealing, closed water in the bathroom, observing, we put the water to three centimeters high, in this closed water process, there is no obvious downstairs, serious leakage, which proves that it is not a problem with the waterproof layer, there is no change below after the water is closed, it is the problem of our water pipes. Of course, if the water level drops in the process of closing the water, and the water leakage downstairs is serious, it proves that it is a problem with the waterproof layer.

Waterproof layer leakage solution.

For the water leakage problem caused by the waterproof layer, first of all, we planed off the floor tiles, directly shoveled off the floor tiles, found the original waterproof layer to clear it, and then used the leak plugging treasure or other waterproof strips and the like, the details are sealed, after the sealing, and then on the large surface, paint the waterproof coating, the façade to remove a standing brick, generally at a height of two hundred and five to three hundred, and then after the waterproofing is done, the floor drain is closed, and then the water is closed, after the qualification, we will restore our floor tiles.

Solutions for leaky water pipes.

For those leaking water pipes and hot and cold water pipes through the ground, after the floor tiles are planed, find the joints of the water pipes below, re-dock these joints, seal them, and after the treatment, bury the water pipes to the ground, and then use cement mortar or plugging treasure to smooth them, and then repair the waterproofing within this range, and then restore the floor tiles and expand the information.

bathroom waterproofing; 1. Bathroom waterproofing:

Toilet waterproof building materials and practices:

1. Pour reinforced concrete floor slabs.

2. The cement mortar is 20mm thick at the thinnest point, and the slope is drained and smoothed at one time.

3. Waterproof Dr. universal K11 waterproof coating is combined with flexible type.

Thick dry hard cement mortar bonding layer.

Before repairing the toilet leakage, it is necessary to determine the cause of the toilet leakage, if the bathroom is leaking water from the waterproof layer, not the leakage of the upper and lower water pipes. The maintenance method is very simple to use a new type of penetrating waterproofing agent to do waterproofing on the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. If it's a problem with the upper and lower plumbing, and the plumbing is underground, you need to consider planing the tiles, but not redecorating the bathroom.

For example, if the inlet pipe is leaking, the pipe can be changed to open the pipe, and the leaking water pipe is not used. If it is a leak in the sewer pipe, it is also necessary to find the specific location of the leakage, and according to the situation, it is determined that it is partially planed bricks to solve, and it is not necessary to plane all of them.

If the floor in the bathroom leaks, you need to knock the floor open, find the leakage, and replace or repair the pipe fittings. Restore the ground after confirming that there is no water leakage.

Bathroom leakage downstairs, first find the cause of the leakage, after dealing with the leaking equipment, if it is a daily water leakage, you should consider doing waterproofing from the new.