I have a router with a network cable in my house, and I want to install a router in the living room

1.Connect to the network first and see what the gateway is, if your local IP is then the gateway on your landlord's side.

2.Initialize your own route first, there is a small hole next to the reset character on the shell, find a thin thing against it for more than ten seconds, you can see that the lights on the route will go off and then on, then you can use the IP on the back of the routerand password logged in.

3. After logging in to your own route, change the IP of the route to the IP of the same network segment as the landlord gateway IP

If the landlord gateway is your own route, change it to and turn off the DHCP service for your own route.

4. Connect the network cable from the landlord's side to any of the ports of your route LAN port (1,2,3,4). Remember not to connect to the WAN port, and the other ports on the LAN port can also be directly connected to the computer.

You can try to bridge the next 2 routers; That is, the first one is to configure a fixed IP and divide the address pool; Then the second one chooses an address in its address pool to fix;