-
Anonymous users2024-01-24The bathroom is waterproof first. 1. The bathroom should first plan the installation of the equipment, and use fine sand cement to do a good job of the slope of the water according to the location of the floor drain of the equipment.
2. After planning, use waterproof paint or waterproof slurry and waterproof cloth to glue or coat the wall more than 30 cm. Near the sewer pipe, a certain construction height should be maintained and waterproof.
3. After blocking the drain and other sewer spaces in the entire bathroom, fill the bathroom to keep the threshold high water, and wait for 1 to 2 days.
4. Observe that the horizontal plane does not fall, or go downstairs to check that there is no trace of water leakage to construct floor tiles and supporting facilities, and at the same time ensure that the waterproof strengthening of various pipe interfaces is strengthened and sealed with cement slurry.
It should be waterproof first, and then lay the floor heating pipe (in case the floor heating pipe breaks, it will not hurt downstairs).Generally, for insurance purposes, another layer of waterproofing is done before laying floor tiles in the bathroom to avoid water seepage on the ground. I was in charge of the renovation of the serviced apartment, which was full floor heating, and I did just that. >>>More
If you don't do waterproofing first, the gap between the partition and the ground will leak later, so be sure to do waterproofing first.
Do you do waterproofing or underfloor heating in the bathroom first? >>>More
Waterproofing must be done before tiling.
The main reasons are: >>>More
Do waterproofing first. If conditions allow, it can be waterproofed twice. Because there are many toilet pipes and water facilities, it is inevitable that water leakage and seepage will occur. >>>More