-
Multi-router bridging use: There are two ways, which can be wired bridging or wireless relay, but the two settings are different, and the physical connection methods are also different;
If you have any further questions, explain the bridging method used; If you are satisfied, please give points!
-
You're going to set up a wireless relay right, you can check it out here.
-
It's better to buy a thousand routers directly.
-
You can find someone to fix the computer, and he will solve it.
-
The best way to do that is to relay!
-
You can call the person who installed the broadband and he can help you transfer OK
-
How big is your house, isn't one enough?
Connect your computer to the router you want to modify with a network cable, then enter the run command CMD, enter arp -a in the DOS window and press enter, check the IP address of that router. Then it's time to set it up.
Two routers are cascaded.
Correct wiring method: >>>More
Change the IP segment of the second wireless router to avoid conflicts with the IP segment of the first router. >>>More
Hello! There are two ways to connect a router to another router: >>>More
The first IP is set, the second is set, the second router turns off DHCP, after the WDS is turned on in the wireless interface, the SSID of the first one is the name of the first server, and the password test and password must be the same as the first router, and the first computer should also be set up in the same way, but there is no need to enter the password.