-
Anonymous users2024-01-24The steps for painting white stubble furniture are as follows:
1. First of all, according to the roughness and hardness of the wood surface, choose sandpaper of the same type for sanding.
2. Brush the primer, adjust the consistency of the primer according to the density of the wood, hardwood has a high density, the paint can be diluted a little, and the softwood should be thickened. When painting, it should be evenly painted along the texture of the wood, not too thick, and sanded with sandpaper after it is completely dry until it feels smooth and has no protrusions, wipe it several times with a damp soft cloth, and finally wipe it dry.
3. Brush the second coat of paint, to cover the first coat of paint, and then gently and evenly grind with water sandpaper along the direction of the paint.
4. It is to brush the furniture with paint for the third time, and use finer water sandpaper to dip it in water after brushing, and the strength should not be too strong, and the polishing should be uniform.
5. The last coat of lacquer, no need to polish, just a layer of protective wax.
-
Anonymous users2024-01-23Fill in the defects first, then sand the object lightly, then do a good job of hygiene, and then apply two to three times of polyester transparent bottom or white primer, preferably white bottom, each time to sand, and finally two to three times of polyester white topcoat.
Precautions when painting.
1. The requirements for protection and closure work are particularly high. There are two aspects here, one is that the environment should be as dust-free as possible; Second, it is necessary to protect the paint film after spraying and do not damage the paint film.
2. All high-grade varnishes are used, and special color essence is used for color mixing, and organic pigments must be used for color essence, and inorganic pigments cannot be used.
3. Use different color ratios, spray 5-8 samples, choose the model with satisfactory tones, and then prepare the paint according to the fixed ratio, not too much each time, and finally start spraying.
4. During the spraying process, the change and contrast of the color difference on the paint surface should be observed at any time, and the color difference should be adjusted by using the residence time of the spray gun or the number of spraying times to make the paint tone on the surface consistent.
5. Every 1-2 sprays of paint, it is required to polish once, and water sandpaper must be used when grinding, gradually increasing from No. 300 to No. 1000, and a small amount of water should be dipped in water when polishing. The surface should be cleaned after sanding.
6. Generally, it needs to be sprayed 5-8 times, and the last 1-2 times of topcoat can not be added, so that the decorative effect of the paint surface can have a sense of hierarchy and three-dimensionality.
-
Anonymous users2024-01-22Slowly preparing all the items you need to brush wood is probably the most overlooked step, but it's very important.
Scrape the sand where tweezers or filler have been used.
When using sandpaper, follow its pattern and not the other way around.
The old marks of the existing paint have to be coarse and gritty, which must be sanded and removed.
Fill those long and deep cracks and smooth it with a small bead.
Use a damp cloth to wipe off excess sawdust, dust, grit, etc., and this will not affect the quality of the wood when you brush it.
Paint properly. Refer to the website, there are also white stubble furniture and seat manufacturers, website.
Unpainted (woodenware) furniture.
Observe the details, the first thing to look at solid wood furniture is the wood grain scar, whether the imposition furniture is built as a whole, there is no color difference, and the wood that is very regular is often not pure solid wood. Panel furniture looks at the edge banding, and if the edge is not good, harmful substances will be released. See if the front and back wood grains in the same position are consistent and whether they have a certain gloss. >>>More
The home can be furnished with white stubble, which is in the original style, but this furniture is very much in consideration of the aesthetics of the owner of the room. In the matching of accessories and bedding arrangement, the original atmosphere should be reflected, just like a wooden house in the forest and a stone house in the mountains. In the original simplicity, the sophistication of modern people is revealed. >>>More
Generally, polyester paint is used for wooden furniture, and as far as I know, polyurethane paint is floor paint, metallic paint, and oil-based paint with heavy colors are mainly used for color mixing.
Unpainted (wooden utensils) furniture is called white stubble furniture, which can be divided into elm log furniture, camphor wood log furniture, Ke wood log furniture, vertebral wood furniture, etc. >>>More
White stubble furniture brushing rapeseed oil should be on some of the paint accordingly, otherwise, just a kind of rapeseed oil, its brightness is not enough.