The floor tiles in the living room need to be leveled first, and the floor of the room will be highe

1. The floor tiles are generally constructed by dry paste method, and are directly paved on the original ground, and there is no need for additional leveling, so there is no problem of one-time leveling. Moreover, even if the thickness of the floor tiles is comparable to that of the floor, when the floor tiles are paved, cement slurry is still needed, and there will be a few millimeters of error between the thickness and the composite floor; Even if there is a moisture-proof film under the floor, the thickness of the film cannot catch up with the thickness of the cement slurry. Therefore, the leveling is carried out separately.

2. If you can't stick the floor tiles first, as long as you determine the horizontal position of each part, level the position of the composite floor first. The same can be done, subtract the thickness of the floor and the thickness of the moisture-proof film under the uniform finished surface.

Workers will find the level of the whole house before pasting the floor tiles, and you only need to report the thickness of the wooden floor you bought to the workers. The worker will leave you the thickness of the bedroom.

Bedroom flooring is installed in the last step! Generally, the living room is pasted first, then the bathroom and kitchen, and finally the bedroom wooden floor!

It is better to lay floor tiles in the room first, and then floor tiles in the living room.