How to install the toilet seat

Method 1: Find the screw cap, remove it with a live hand, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark.

The screw cap in the dark place, on the side of the water tank in the toilet, is generally set on the edge of the water tank of the toilet, and the lid is opened. If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 2: To install the toilet lid, you actually need to remove the fixing bolts on the back of the toilet, remove the previous toilet lid, and then replace the new toilet lid with a fixed screw cap. At present, most toilet seats are large and small, as long as the screws at both ends of the toilet are done.

However, the size of the toilet bowl must be measured before changing the toilet lid, and the width and length of the screw cap from the toilet lid also need to be determined. So as not to buy products that do not fit.

Method 3: If you still find it difficult to use the above two methods, we can find a professional to change. As long as it is a product provided by their manufacturer, they will generally have free after-sales service.

So if you find someone else, how much does it cost to change a toilet seat? I don't think this price can be determined, because there will be differences in the charges of each place and each person, and it is impossible to give an exact figure. At present, the brands of toilets with relatively good sales are roughly ranging from 30 to 100.

The Titan bathroom toilet seat is pretty good.

Answer: Before replacing, you should first prepare a toilet seat of high quality size. For example, in the installation, if the size of the toilet lid does not match the toilet, or the color is different, even if it looks very unsightly after installation, we must choose the same size according to the original toilet lid of the toilet.

2. After the new toilet lid is ready, the original toilet lid must be removed, generally speaking, behind the toilet seat, that is, at the root of the bottom of the toilet seat, there will be two round screws, which is the fixing point of the toilet seat. And some manufacturers will directly seal it in production, if these two screws are not found, then we can only pick up the cover, and then remove the screws on it, so that the toilet seat can be removed.

3. When the toilet is removed, then we have to install the new toilet cover, according to the same way, we must first determine the specific position of the screws, put the new toilet cover on after alignment, and then install and fix it with a screw cap.

4. After installation, the toilet lid must be cleaned first to avoid affecting our normal installation during installation. After the installation is completed, it is necessary to check whether the toilet lid has been fixed, if the screws are not tightened, then we will have the toilet lid will shake when we use it, and it will directly affect the service life of the toilet, and it will also bring us very inconvenience in use, or you can directly contact the professional installer to help replace the toilet cover when installing it, which is not only convenient and fast, but also the installation effect will be better.

There are hinges behind the toilet seat, you just have to fix the hinges to the toilet, right.

The steps of the installation method of the toilet lid are as follows;

1.Buying a new toilet seat Before we buy a toilet seat, we must first measure the length and width of the toilet seat, the hole spacing and record it. When purchasing a toilet, you can inform the merchant of these measurement data, and the merchant will help you choose the appropriate size and specification of the toilet seat, so that there will be no problem that the toilet seat and toilet size do not match and cannot be installed.

2.Remove the old toilet seat If the old toilet seat in your home has not been removed, you should remove it. We first open the toilet seat, then touch the lower part of the toilet lid near the water tank, we can feel the fixing screws of the toilet seat, and finally we rotate the screws to remove it, and then hold the toilet lid with both hands to lift it.

3.Install the toilet seat fixing plate We first wipe the toilet bowl with a rag, then align the fixing plate of the toilet seat with the toilet seat mounting hole and place it, the next step we put the screws into the card slot, and then put the card slot on the fixing plate. When installing the card slot accessories, the screws should be inserted into the installation hole of the toilet cover, and the card slot should be placed in line with the fixing plate tooth wire.

Finally we use puffing.

4.Installing the toilet lid We lay the toilet lid flat on the toilet bowl, press and hold the unlock button on the toilet seat, and push the toilet lid in parallel so that its plastic card slot is pushed onto the fixing plate. Once the toilet seat is installed, we plug the smart toilet seat into the outlet.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.