-
Anonymous users2024-01-23The toilet at home has been used for a long time, and the toilet lid is the most likely to break, and it is often loose and causes it to fall down when it is opened. Change the toilet seat and prepare the materials, and it can be done in five minutes.
Materials required: a set of toilet seats with accessories (including a pair of toilet seats, 2 screws, 2 square tenons, and 2 sets of nuts).
Steps to change the toilet seat:
1. Loosen the screws that fix the toilet lid under the back side of both sides of the toilet first, and remove the old toilet seat.
2. The two screws in the fitting are inserted into the square tenon first, and then put into the iron shafts on both sides of the toilet seat.
3. The screws on both sides are aligned with the screw holes on both sides of the back of the toilet, and the screws are locked according to the upper and lower positions of the screw caps.
If the toilet is not installed, you can install the toilet lid on the back of the toilet, which is more convenient and convenient to install, but if the toilet has been installed and fixed, it is necessary to dig out the installation from the back side, which is more awkward, but it can only be installed in this way.
Toilet seat option one.
Nowadays, the length of the toilet lid is basically more than 50 cm, but many toilet seats have reached about 52-58 cm, and the length of the inner diameter of the seat corresponding to the size of the toilet lid is basically about 30 cm, and when we buy the toilet lid, we can measure the length of the toilet bowl to the front tip of the water tank along the center line of the toilet, which is generally more than 50 cm. >>>More
Common methods of disassembling and assembling toilet seats. >>>More
Method 1 to change the toilet seat: find the screw cap, remove it with a live hand, and then replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. >>>More
If the toilet seat is not of good quality and cracks, or if it has been used for too long and causes it to turn yellow and dirty, we can replace the toilet seat at this time. We measure the size, choose the corresponding toilet lid can be installed, the installation method is very simple, unscrew the fixing screws, replace the new toilet lid on it, let's take a look at the operation method. >>>More