What to do if the bathroom leaks, the leakage is quite serious, I want to find someone to fix it, bu

1. Water leakage in all bathrooms is not a trivial matter, and such a phenomenon should be dealt with in time to avoid affecting our lives due to water leakage. The specific methods of bathroom leakage are mainly as follows: 1. Protect the wall and ground, and first smash the tiles of the wall and the ground at the junction of the wall and the ground according to the leakage point downstairs (that is, the wall of the lowest layer of the wall and a circle of floor tiles connected with the wall); 2. Clean up the loose floating soil mortar from the base layer of the smashed tiles, and paint the interface agent on the surface; 3. After the interface agent is dried, paint the plugging spirit to make it seamless and covered with the original wall and ground waterproofing; 4. After the paint film of the leakage plugging spirit or other waterproof materials is dry, do the ground closed water test for 24 hours, and then pave the wall and floor tiles after there is no leakage.

It is advisable to chisel the tiles anyway.

The cause of the water leakage should be a crack in the waterproof layer or a place where there is a leaking brush.

According to the location of the leakage point on the roof downstairs, the location is determined, and then the floor tiles are chiseled and the leakage site is retreated.

There are two possibilities for water seepage downstairs, one is the leakage of domestic water to the downstairs, and the other is caused by the leakage of the buried water pipe on the ground. You can use the pressure test to see if the pressure is lost to determine whether it is a leakage of the buried water pipe, or you can turn off all the water outlet valves to observe whether the water meter rotates and walks. If there is no problem with the buried water pipe, it is only that the waterproof layer is cracked, and the cracked position can be plugged with leakage.