-
Anonymous users2024-01-24How to waterproof the ceiling.
1. The base layer of the construction area generally has surface floating dust and loose concrete, so the surface should be treated with a polishing machine to clean and remove the surface water and oil traces.
2. The waterproof material is prepared in proportion, the ratio is 1:4, and the two components can be stirred directly to the paste without adding any solvent.
3. After adjustment, you can directly use the board to evenly wipe the waterproof material on the ceiling, as long as it is evenly wiped, no technology is required.
4. Remember to strengthen the coating at the joints of the two walls, because this place is fragile and easy to leak.
5. As long as it is protected for 24 hours after uniform application, other decorations can be carried out, such as batch putty, brushing paint, etc. And it can be guaranteed to be leaky for 30 years.
The first step is to remind everyone that the water circuit of the bathroom should be observed and transformed in combination with the actual situation, so as to have a detailed understanding of the concealment project. After the plan is determined, the water, electricity and heating pipes are laid and chiseled. Secondly, in the base treatment, the original decorative materials should be cleaned before the waterproofing project of the bathroom, and then the several sides are paved with cement slurry, and then the waterproof treatment is carried out. >>>More
1. Polyurethane waterproofing (is extracted from asphalt). Please don't buy coal coke refined, it's too toxic. >>>More
Of course, it is necessary, of course, the bathroom needs to be directly waterproofed construction engineering, after all, the bathroom is the place with the most domestic water. Waterproofing is the most important protection project, in the decoration is the most important thing, especially like the bathroom this special place, it is necessary to do a good job of waterproofing, you want to take a bath every day, if the waterproof work is not in place, it will leak, when the repair is particularly troublesome. >>>More
1. Bathroom waterproof construction steps.
Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Judging from the picture, the gap is not evenly balanced, and if you flick it with a tool from the corresponding direction, it should be aligned, and there will be no big gap, try it.