-
Anonymous users2024-01-24The split toilet is connected by two bolts, the nut is under the water tank, one on the left and one on the right, remove the nut, and at the same time remove the water pipe, the water tank can be taken down.
The big workshop reminds you: the one-piece toilet tank cannot be removed.
First close the angle valve under the water storage tank, drain the water in the water tank, remove the connecting pipe connected to the water inlet valve, hold the water supply valve in the water tank with one hand, use a wrench to remove the heel of the fixed valve under the water tank, and pull the valve out of the water tank.
Step 1: Find the screw cap, remove it with a live hand, and replace it with a new one. >>>More
The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.
Are you having a problem with the control valve, is it the float device, and if so, adjust the screws at the top of the float linkage. >>>More
1. The inlet water level is raised, and the inlet float is not sensitive, so it is enough to lower the inlet water level. >>>More