How to dismantle the kitchen plastic steel ceiling

Because such materials require professional tools to be disassembled, and if you are not careful, the original structure will be damaged or you will not be able to install it during renovation. It is necessary to hire professional demolition personnel to carry out the dismantling work, so as to ensure the smooth completion of the redecoration.

We also need to know the precautions when disassembling the kitchen ceiling

1. When the original ceiling decoration is removed, attention should be paid to removing it as much as possible and not retaining the original ceiling decoration structure. In particular, the structure that carries the weight of the ceiling such as the boom and pendant in the original ceiling must be removed, which is mainly for future safety considerations.

2. When dismantling, the power supply should be cut off first, and the original circuit pipeline in the ceiling should be removed as much as possible, and no longer consider continuing to use, because the original circuit in the ceiling has basically no use value.

3. When demolishing, the safety of the equipment and facilities in the original ceiling should be considered, many old houses in the last century have heating pipelines in the ceiling, and some residences are the core air conditioning system, so as to avoid damage to the pipelines and equipment due to inattention during demolition.

4. When removing the original ceiling in the kitchen and bathroom, avoid damaging the ventilation duct and flue.

Dismantling starts with the last board at the time of installation, which is the opposite of installation.

No, since you have found the first piece, dismantle the first piece, and then remove each piece in order, and finally remove the corner line, the corner line is also mostly fixed with screws, maybe you can't see the position of the nail, it should be in the seam of the corner line. Remove them one by one, and the corners come down naturally.

The kitchen plastic steel ceiling should be removed from the surrounding strips, the plastic steel plate has a slot, and then retreat from the last board to dismantle it.