There is a slope in the bathroom, what to do by pressing the toilet

Redo: In such a situation, if it is not too troublesome, re-lay the floor tiles, remove the floor tiles, try not to destroy the waterproof layer, and re-find the drainage slope. Otherwise, it can only be used, so you must pay attention to this problem when building the bathroom floor, otherwise you will be troublesome in the end. >>>More

Answer 1, redo: if the slope is really not enough, and other methods almost do not have a particularly good effect, when the bathroom water is still more serious when taking a bath, then the best way is to redo the ground slope, this is more laborious and costly, you need to break the floor tile to redo the waterproof slope, and then paste the tile. >>>More

There is a methane overflow in the toilet in the bathroom, mainly because the bottom seat is not sealed well, and the air is leaking. . . >>>More

I feel that you should say that the wall tiles are not paved, and you are afraid that the ceiling will not be able to expose the cement wall without tiles. Generally speaking, the bathroom is not less than the meter, and the kitchen is not less than the meter, and the kitchen is not less than the meter, which will not affect the use and sense of space. You measure whether there are meters at the lowest point of the wall tiles.

It is impossible to completely eliminate it, unless it is not used, you can shorten the cleaning time of the toilet bowl to reduce the odor, and at the same time, putting a toilet cleaning block in the toilet tank also has some effect.