-
Anonymous users2024-01-24Use the plugging king, if it doesn't look good, don't fill it too full, and then use the caulking king to hook the seam.
-
Anonymous users2024-01-23Materials such as steel tough mud are used to deal with this problem.
Hope it helps.
Scrape off the original deteriorated porcelain white glue, clean the joints, and then fill the joints with white sewing agent. I hope my answer can help you.
What to fill the gaps in the bathroom tiles can be waterproof, and the joint material must be selected to ensure that the bathroom does not leak.
Generally speaking. The floor tiles of the bathroom, he should not have a gap, otherwise this joint is not tight. It's easy to leak.
The problem of waterproofing is very troublesome, first look at the downstairs seepage or not, no leakage means that the waterproof layer is fine. There are generally two situations of water seepage, 1. Water pipe leakage (use a pressure test pump 8kg to test the pressure, if the pressure is dropped, it means water leakage, knock off the floor tile to repair); 2. The domestic water that penetrates from the surface of the floor tiles should be closed with acrylic waterproof glue (or transparent waterproofing agent) on the floor tiles, and turned up 30cm; 3. The interface between the floor drain and the flush toilet and the PVC sewer pipe is leaking, remove the equipment and redo the interface. It's best to find someone who has experience to help you with each test, I hope it will help you.
As the only washing area in the family, the bathroom is in contact with water for a long time, and the brick joints are leaking, first check the cause of water seepage, 32313133353236313431303231363533e59b9ee7ad9431333264663664 Secondly, repair the water seepage area according to the reason, and finally pay attention to daily maintenance. >>>More