Is the bathroom sunken and filled with putty powder? Will there be any impact?

Updated on Bathroom 2024-06-22
1 answers
  1. Anonymous users2024-01-24

    1. No, the bathroom is indispensable for every family, and its filling is best made of light materials, such as panning sand or furnace ash slag, and then watered with 1:4 cement mortar. But waterproofing must be done well. Kiss.

Related questions
8 answers2024-06-22

Don't use this way, it will be quite troublesome in the future, it will bring a lot of trouble to the tenant to use, and it will cost more to rework the decoration after using it for yourself or buying and selling it to others in the future. It is recommended to use cheap tiles, after painting waterproof paint in the kitchen and bathroom, paste about 1 meter or meter, and scrape the upper part with thick putty and polish it flat. It is convenient for tenants to use after renting and for subsequent redecoration.

2 answers2024-06-22

No.

When the tile is paved, putty powder can not be added to the adhesive mortar, and in the configuration of cement mortar, putty powder is mixed into it, which will reduce the bonding strength and bonding effectiveness of the cement mortar, which will lead to construction quality problems such as loosening and falling off of the tiles in the later stage. >>>More

4 answers2024-06-22

The decoration of the sunken bathroom is like this:1The sunken ground is first waterproofed twice. >>>More

11 answers2024-06-22

Due to space constraints, some units have no windows in their bathrooms. Of course, this kind of bathroom is not as good as having windows, but now the bathrooms are all ventilated ducts, open the exhaust fan for exhaust, and the air is OK, and the air quality requirements are not particularly high.

1 answers2024-06-22

Sunken toilet filling common problems and solutions:

1. The waterproof layer of the coating film is hollow and has bubbles: mainly because the base layer is not clean, or because the screed layer is wet, the moisture content is higher than 90%, and the moisture content test is not carried out before painting, resulting in hollowing, and in serious cases, it causes a large area of bulging. Therefore, before applying the waterproof layer, the base layer must be cleaned and the moisture content test must be done. >>>More