-
Anonymous users2024-01-23Sunken toilet filling common problems and solutions:
1. The waterproof layer of the coating film is hollow and has bubbles: mainly because the base layer is not clean, or because the screed layer is wet, the moisture content is higher than 90%, and the moisture content test is not carried out before painting, resulting in hollowing, and in serious cases, it causes a large area of bulging. Therefore, before applying the waterproof layer, the base layer must be cleaned and the moisture content test must be done.
2. After the ground surface layer is completed, the water storage test is carried out, and there is a leakage phenomenon: after the waterproof layer of the coating film is completed, the first water storage test must be carried out, if there is a leakage phenomenon, it can be repaired according to the specific part of the leakage, and even all rework until the water storage is 2cm high, and the observation is not leaking for 24 hours. After the ground surface layer is completed, the second water storage test is carried out, and the 24-hour no leakage is observed as the final qualification, and the water storage inspection record is filled.
The sunken toilet refers to the partial or overall sinking of the bathroom structure layer from the corresponding ground to a certain height when the main body is built, which is generally about 30CM. COLLOQUIALLY SPEAKING, THE FLOOR LEVEL OF THIS BATHROOM IS ABOUT 30CM LOWER THAN THE FLOOR LEVEL OF OTHER ROOMS. Advantages of sunken toilet Compared with ordinary toilets, sunken toilets have three extremely significant advantages, one is that the sunken toilets do not have the pipes of the previous sewers, and the floor height of the bathroom is relatively higher; Second, the sunken toilet is convenient for the flexible arrangement of sanitary ware, and the location of sanitary ware can be set according to your own needs and preferences when receiving the room decoration, which meets the needs of humanized living; Third, it brings convenience to pipeline maintenance, which only needs to be carried out in the bathroom of your own home, and cannot interfere with the residents downstairs. >>>More
The key is to deal with the waterproofing of the floor slab, in this case, the more light materials are used to fill in, the higher the probability of leakage after water absorption, so it is really possible to understand the waterproofing of waterproofing, and provide free professional technical advice on concrete waterproof leakage water repair.
Can you fill the bottom of a sunken bathroom with dirt, and what is the best way to fill it? Today is a long time to see.
The primary role of ceramsite cushion is light and high-strength, light weight and high strength! So it should be good.
First do a good job of the slope of the sinking position, and then do waterproofing, after doing a good job of waterproofing, place the sewage and drainage pipes, and then cover the cast-in-place putty board, and then do waterproofing. This is the practice of sinking caissons, doing secondary drainage.