What should I do if the black cement on the side of the bathroom tile is not cleaned?

Updated on Bathroom 2024-06-20
3 answers
  1. Anonymous users2024-01-24

    1. If there is cement on the tile surface, shovel it off directly, wipe it clean with a wet rag, if it is not good, you can use 150 fine sandpaper to polish, but you must be careful when sanding, do not polish other things.

  2. Anonymous users2024-01-23

    If it is a joint of two bricks, it can be treated with grout.

  3. Anonymous users2024-01-22

    Mechanical vibration, air hammer, heat treatment.

Related questions
1 answers2024-06-20

Hello, is the sanitary ware ceramic? If so, you can wet the black cement stuck to it and remove it with a cleaning ball.

4 answers2024-06-20

It can only be removed by mechanical methods, and the plastic plate can be scraped with a steel wool brush for cleaning, and be careful about the glazed ceramic tile!

1 answers2024-06-20

The scientific name is "toilet cleaner", do not use it with 84, it will cause poisoning, only use toilet cleaner or one of 84.

13 answers2024-06-20

1. Dry cloth wiping, no matter what kind of bathroom tiles, you must master some specific bathroom tile cleaning methods, for general stains, wiping with a rag is much better than wiping with a damp cloth. Wet cloth wiping will leave some stains on some tiles, but if you wipe them with a dry cloth, they will get brighter and brighter. Therefore, different tiles are cleaned with different bathroom tiles, and the effect will often be doubled. >>>More

2 answers2024-06-20

The toilet cleaner squeezes out and brushes the tiled floor with a broom, and rinses it with water after a few minutes. >>>More