How to install the KT board tag on the ceiling

Updated on Suspended ceilings 2024-06-11
2 answers
  1. Anonymous users2024-01-24

    KT board perforated fishing line. If there is a partition in the ceiling, tie it directly to it; If it's a wooden plank, you can nail it with a nail gun; The cement wall is about to be punched and screwed!

  2. Anonymous users2024-01-23

    It depends on the situation.

    If there is a partition between the ceilings, tie them directly to them;

    If it's a wooden plank, then nail it with a nail gun;

    But if it's a cement wall, you have to punch holes and screws!

Related questions
3 answers2024-06-11

First of all, look at your ceiling area to talk about whether there is a risk of fire, generally. >>>More

3 answers2024-06-11

Before the ceiling, consider the installation location of the lamp and take measures. Now you can only choose a chandelier with light weight as much as possible, and look for a position with a keel to fix the chandelier. >>>More

1 answers2024-06-11

The general renovation construction team will deal with it. Before the decoration of the house, the position of the socket should be chiseled by the plasterer on the cement wall with a trunking, the wire is placed above the ceiling keel, and then the trunking along the wall is put into the socket position through the line pipe, and then the plasterer cement smooths the trunking on the wall.

2 answers2024-06-11

Maybe it comes down from above, and some go up from below. The rats are all acrobatic masters, and they have seen them with their own eyes, walking tightropes, climbing wires, holding eggs, flipping from one height to another, and flying cornices and walls.

1 answers2024-06-11

If it is not a height, it can be graded to hang; If you can make a slope, just make an oblique skeleton.