-
Anonymous users2024-01-24Bathroom water pipe installation steps and precautions.
Bathroom water pipe is an important part of bathroom decoration, we have to flush the toilet every day, bath, etc., will use a lot of water, so the quality and scientificity of the bathroom water pipe installation must be high. Next, let's tell you the steps and precautions for installing bathroom water pipes, let's learn together
1. The correct sequence of bathroom water pipe installation.
Before the installation of the water pipe in the bathroom, we must follow certain reasonable steps, generally we must first discuss the specific direction of the waterway with the installation master, the second step is to fix the clip to the wall with an electric hammer, the third step is to start using a professional hot melt machine to hot-melt the pipe, the fourth step is to use a pressure test pump to test the entire pipeline, and the fifth step is to clean up the site.
Second, the design and layout of toilet water pipes.
The installation of toilet water pipes should be laid according to the direction of the water, generally horizontal and vertical, as far as possible 2 pipes do not cross, if the cross to build a bridge, the hot and cold water pipes are separated and kept at a certain distance, and the left and right positions of the bath mixing valve are correct and installed in the bath.
In the middle of the tank, the height should be between meters and meters, and the installation of the water heater and the inlet and outlet of the washing machine should be reserved to achieve a scientific and reasonable layout.
3. Pressure measurement process of toilet water pipes.
Before the pressure test, the valve behind the water meter should be closed, the tail end of the pressure test pipeline should be blocked and slowly injected with water, and the sealing inspection should be carried out after filling with water, and then the pressure should be manually boosted.
Precautions for bathroom water pipe installation:
1. If you decide to slot the pipe, it's best to ask the property first, whether you can groove the place where you envision the pipe, if not, it's best to think of other methods, otherwise you will be in a hurry and you will definitely be stupid.
2. In addition to leaving a faucet for the washing machine, it is best to leave a faucet interface in the bathroom, so that it is convenient to receive some water to water the flowers in the future. This problem can also be solved by purchasing a shower with a faucet.
3. The position of the water inlet interface left for the toilet must be adapted to the height of the toilet tank from the ground.
4. At the wash basin, if the column basin is installed, pay attention to the distance between the hot and cold water outlets should not be too wide, or the column basin is not installed, the width of the column basin can not cover the hot and cold water pipes, and from the front of the column basin, you can see that there are water pipes on both sides.
It is true that it cannot be installed in the bathroom.
Every year in our north, there are smoke-making incidents. >>>More
Hello peers, the bathroom also makes renderings
There are three methods: one is to build with bricks, and then to paste bricks. >>>More
You look at the instructions, it's all recommended to be concealed, and it doesn't have much to do with the way it is drawn. >>>More
1. For ordinary families, there are three main places to use the family bathroom, bathing, washing and going to the toilet. Therefore, bath bombs, sinks and toilets are the three major parts of the bathroom. Be careful not to point the mirror at the toilet and not at the toilet door. >>>More
It depends on how you did the original waterproofing to decide if you need to do it all over! Provide free professional technical consultation for concrete waterproof leakage repair.