-
Anonymous users2024-01-24The pulley is stuck in the aluminum alloy lower frame, and there are holes on the side, and the height of the door can be adjusted by adjusting the screws. When installing the door, first put the upper part into the upper rail, and then press down (either by hand or paper card) the slide wheel, move it into the lower rail, okay, OK!
-
Anonymous users2024-01-23The sliding door does not move, the cause of the abnormal noise and the solution.
1) Reason: Mainly the lubrication and rust prevention of the slideway and the small wheel.
2) Use lubricating materials: to use sliding door wheel rail grease, Senge and other well-known sliding door brands use tiger head hotolube or Kruber sliding door wheel rail grease. Colorless and odorless, with good durability and safety certification.
There are 130 grams of small tubes in the hedge, which is easy to use. The maintenance interval is half a year.
3) Coating method: First of all, clean the slideway carefully, apply the grease into the slideway and pulley, pull the door several times, the grease will penetrate into the slide and the bearing, and then pull it very smoothly.
Second, now, the effect is still relatively good, the quality is very good, and the harvest is also good.
Is it MDF?
This kind of board can only be used as a door panel. >>>More
The above is a competitor, otherwise how can it be so malicious slander, I use Huayi's, the quality is very good, the service is really not to say, the most important thing is factory direct sales, after-sales service is very good, and it looks good at home.
If the employer deducts or arrears the wages of the employee without reason, the employee may file a complaint with the labor and social security inspection brigade against the employer or apply for labor arbitration. >>>More
Suining County 100 million furniture factory.
Suining County, Jiangsu. >>>More