-
Anonymous users2024-01-24Install the second floor, no, if you really want to install on the second floor, the premise is that your home water supply must be tap water, and the water pressure is normal, if not, then it can only be installed on the first floor, if the hot water is sent from the first floor to the second floor, there is common sense, it will be easy to use, even if the water pressure is enough, it may not be easy to use, if someone on the first floor uses water at the same time, the water heater will not be affected by the water pressure, and it will not work, so it will be better to install the first floor! You have to take a look at whether the water pressure of your water supply pipeline and tap water is normal, in short, put the second floor as long as the machine can work, not affected by the use of water, then it is OK, on the contrary, it is not possible, you say that the water heater on the second floor is cold and hot, I am worried that the water pressure is unstable, and there is a pipeline blocked, the normal water flow has become smaller, you may have to find out if it is blocked.
-
Anonymous users2024-01-23Where is it used more, it is installed there, is your home water heater electric or solar?
-
Anonymous users2024-01-22It is recommended to install it in the bathroom with frequent use.
It is completely possible to connect the cold and hot water pipes of the two rooms when installing the pipeline, and install two "dark fast valves" in the middle, and open or close the dark fast valve when using it to realize the conversion of cold and hot water in two rooms. The dark fast valve is generally sold in plumbing hardware stores, the price ranges from 60 to 150 yuan, try to buy the brand, because it is very troublesome to repair and replace.
Judging from the phenomenon described, most of them are due to the wrong water line connection or the hot water line between the other bathroom and the water heater is dirty, blocked, broken or connected to the wrong pipe. >>>More
Storage type electric water heater?
In the process of putting hot water in the previous toilet and reaching 60 degrees, a certain amount of tap water enters the water heater, and the tap water entering the water heater is mixed with the hot water in the water heater for cooling, and when the hot water is turned on in the other bathroom, the tap water continues to enter the mixing to cool down, resulting in a drop in water temperature. >>>More
Check whether the water outlet is blocked, and whether there is dirt left in the pipe during the installation of the pipe, causing blockage; In addition, if the hot water outlet pipe is too long, it will also cause the water outlet of the water heater installed far away to be small. It is recommended to install a separate water heater in each bathroom!
Whether to install two water heaters or one in a house, and which type to install, depends on the location used in the room and the allowable installation conditions. >>>More