What should I do if the new anti theft door key can t be turned and pulled out

1. Generally speaking, the key can not be pulled out is not in a good position, some are caused by the dislocation of the lock cylinder of the anti-theft door, when the lock cylinder appears outward after returning to the position, you can press it down with your hand, and the other hand can move the key to pull it out;

2. You can also move the key after pouring pencil ink into the keyhole, and then try to pull it out;

3. A lock cylinder marble is astringent, two keys and marble are stuck, at this time, use universal lubrication rust remover to spray into the lock hole, move the key, and then try to pull it out;

4. Screw the head in the direction that can be screwed, and then quickly screw it back, press it hard inward, and it will come out after a circle;

5. If you still can't pull it out, we can try to see if the direction is correct;

1. Generally speaking, the key can not be pulled out is not in a good position, some are caused by the dislocation of the lock cylinder of the anti-theft door, when the lock cylinder appears outward after returning to the position, you can press it down with your hand, and the other hand can move the key to pull it out; 2. You can also move the key after pouring pencil ink into the keyhole, and then try to pull it out; 3. A lock cylinder marble is astringent, two keys and marble are stuck, at this time, use universal lubrication rust remover to spray into the lock hole, move the key, and then try to pull it out; 4. Screw the head in the direction that can be screwed, and then quickly screw it back, press it hard inward, and it will come out after a circle; 5. If you still can't pull it out, we can try to see if the direction is correct; 6. Find an anti-theft door maintenance and lock replacement master to help you open it.

1.Generally speaking, the key can not be pulled out is not in the right position, some are caused by the dislocation of the lock cylinder, when the lock cylinder appears outward after returning to the position, you can press it down with your hand, and the other hand can move the key to pull it out!

2.A lock cylinder marble astringent two keys and marbles stuck, at this time use universal lubrication rust remover spray into the lock hole, move the key, and then try to pull out.

3.You can also fill the keyhole with pencil ink and move the key, and then try to pull it out.

4.Find an anti-theft door repair and lock replacement master to help you open it.

Hope it helps

First, the anti-theft door key can not be turned:

1. Generally speaking, the key can not be pulled out is not in a good position, some are caused by the dislocation of the lock cylinder of the anti-theft door, when the lock cylinder appears outward after returning to the position, you can press it down with your hand, and the other hand can move the key to pull it out;

2. A lock cylinder marble is astringent, two keys and marble are stuck, at this time, use lubricating rust remover to spray into the lock hole, move the key, and then try to pull it out.

3. You can also move the key after pouring pencil ink into the keyhole, and then try to pull it out.

4. Find an anti-theft door repair and lock replacement master to help you open it. Second, what should I do if the anti-theft door key can't be pulled out:

1. Use leather conditioner, spray on the key, the key is easier to pull out, live pencil ink, lubricant. Mechanical gadgets will inevitably get stuck sometimes.

2. Screw the head in the direction that can be screwed, and then quickly screw it back, press hard inward, and it will come out after a circle.

3. If you still can't pull it out, you can try to see if the direction is correct, if you still can't pull it out. The help of a locksmith can be enlisted.

It may be that the new door lock is not run in well, you put some lubricating oil and try again, if it still does not work, the door lock is unqualified, you are a newly installed anti-theft door can ask the merchant to change the lock again, or refuse to pay, the merchant will help you deal with it.

Hello dear! Here's how! 1. Use some lubricating oil to dot the key port.

In fact, the use of the key has a certain number of years, the key is used for too long, it may get stuck when inserting the lock cylinder, once this happens, and you have nothing to do, it is likely that the key will be inserted into the lock, but it cannot be pulled out. 2. It is also possible to apply the powder of the pencil. Put in the pencil lead powder, insert it with the key, and rub it to slide.

3. Suck it out with a magnet stone. Some keys are made of iron, so try to suck them out with a magnet, and if they get stuck, take a bite with a nail clipper and pull them out gently, or use a needle to prick out the edges of the key. 4. Find a lock-picking company to let professionals solve it.

If there is a key in it that is broken, it is not good, basically you can't solve it yourself, when you use the key to open the door, try not to use the key, which will cause the key to pick the lock. 5. Adjust your own unlocking method. Generally, the key is stuck in the lock, it is likely that the key is inserted in the wrong position, you can adjust the position to shake left and right or up and down, move gently, and use too much force, you can pull out the key.

You can go to the hardware store and buy a bottle of sewing machine oil. or bolt loosening agent. Squeeze the oil in along the keyhole. Then slowly move the key. It is possible to pull it out. Or pick the lock. Turn slowly. Don't push too hard.

Hope it helps.

I hope you can give me a thumbs up, your thumbs up are important to me, thank you.

Ask if you still can't turn after adding lubricating oil.

Typing takes time, thanks.

Method: We prepare a steel wire and coat it with 502 glue. Then insert the wire in, wait a few minutes, and when the glue is dry, pull the key with the wire so that the key can be brought out.

Try a friend.

I hope you can give me a thumbs up, your thumbs up are important to me, thank you.

I hope you can give me a thumbs up, your thumbs up are important to me, thank you.

This may be stuck on the key, it is not recommended to pull it out all the time, you can turn the key while pretending.