Which side of the toilet inlet pipe is on

The valve of the inlet pipe is at the top of the inlet pipe, when the water level of the water tank is low, the tap water will enter the water tank through the inlet valve, and when the water in the water tank rises to a certain level, the float that controls the inlet valve will be jacked up, and then the inlet valve will be closed. When the inlet valve is in the water, you can find its location by pulling the float by hand and looking at it.

It's all on the left.

Before disassembling the toilet inlet pipe, you should prepare a water inlet valve set to be reinstalled, as well as items such as common screwdrivers. Then it is necessary to make preparations and turn off the water inlet switch under the toilet tank, so that no more water will enter it, so that the water inlet network pipe can be replaced later. It's no longer just about draining the toilet tank with water. >>>More

According to the reason, there is no need to dismantle the toilet, the worst case is to remove the water tank, remove the water tank to replace the internal part of the broken accessories, and the worst case is to replace all the accessories in the water tank, which should not be too expensive, and work for one or two hours.

If the equipment is plugged in, the water pipe is electrified, then focus on detecting the electrical appliance to see where it leaks. >>>More

Close the triangle valve, turn the hexagonal nut of the water inlet pipe counterclockwise to remove it, and tighten it clockwise when replacing it.