How to make wooden bathroom furniture waterproof and moisture proof

Magic weapon 1: plate selection is the key.

Box panels account for a large part of bathroom furniture, and if you want to choose good bathroom furniture, the main materials can not be sloppy.

Magic weapon 2: back protection is very important.

In the process of choosing bathroom furniture, consumers must pay attention to the details on the back. The use of double decorative veneer back panel can completely avoid the exposure of the MDF substrate, and water will no longer have the opportunity to enter the board from the back of the cabinet, which is a good helper for water and moisture resistance.

Tips: In real life, it is impossible to completely remove the ubiquitous water droplets and water vapor after bathing every time. The backboard veneer is not only waterproof, but also a protector who prolongs the life of the furniture.

Magic weapon 3: Observe more subtleties.

When choosing bathroom furniture, we must pay attention to the small part of the humanized design, which is the key factor in the success or failure of the purchase of furniture.

Magic weapon 4: The internal space should not be ignored.

After a period of use, the bottom plate under the sink cabinet begins to deform due to the condensation left by the water pipes hidden in the cabinet soaking the furniture at the bottom of the cabinet.

Magic weapon five: the installation process should be in place.

When installing bathroom cabinets, it is often necessary to dig holes in the box board, and the multi-functional edge banding rubber strip can tightly wrap the cutting edge of the board, which plays a better role in waterproof and moisture-proof.

In real life, it is impossible to completely remove the ubiquitous water droplets and water vapor after bathing every time. Backsheet veneers are not only waterproof, but also a protector and a very important way to extend the life of furniture.

I hope you are satisfied.

First of all, it is necessary to do a good job of waterproofing the bathroom.

Toilet waterproofing practices:

1. Ground treatment.

Be sure to level the ground before applying waterproofing. Screed construction method: if there are voids, cracks and unequal defects on the base surface, repair and smooth with cement mortar.

The base surface must be firm, flat, clean, free of dust, greasy, wax, release agent, etc., and other debris substances. The construction of the waterproof layer can only be carried out after the screed is dry, and the construction should be fireproof and waterproof during the construction. After the waterproof layer is completed, the finished product should be protected, and no one should walk around.

2. Wall treatment.

About 300mm high waterproof paint should be used for wall treatment to prevent water from penetrating the wall and returning moisture.

The painting height between the wall and the floor (plane and façade) of the bathroom should be greater than 100mm.

If there is a shower in the bathroom, the waterproof height of the room is not less than 1800mm.

If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 300mm higher than the bathtub.

The waterproof height of the bathtub is not less than 800mm.

The waterproof height of the squatting pit should exceed the ground of the squatting platform by 400mm.

For the light wall of the bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top.

3. Do a closed water test.

After the waterproofing construction is completed, the water storage test is carried out. Block all the drains in the bathroom, build a water barrier about 200mm high at the door, and then pour about 20mm 30mm deep water into the bathroom, and check whether there is leakage on the surrounding walls and the ground after 24 hours, the waterproof experiment is the key to ensure the quality of the bathroom waterproof project, and it must be done. If there is no leakage after more than 24 hours, it is considered qualified.

If water leakage is found, the water storage test should be stopped immediately, the waterproof layer should be re-improved, and the water storage test should be carried out after the treatment is qualified.

With the development and progress of science and technology, wooden furniture has played an increasingly important role in people's nuclear life, but there is also a problem that the life of use is not very long, so how can we extend the service life of wooden furniture? Nowadays, many houses have water leakage in the bathroom, how to prevent it? Here are a few magic tips:

Kohler Bathroom. The magic weapon is Xun Xunyi: plate selection is the key.

Box panels account for a large part of bathroom furniture, and if you want to choose good bathroom furniture, the main materials can not be sloppy.

Magic weapon 2: back protection is very important.

In the process of choosing bathroom furniture, consumers must pay attention to the details on the back. The use of double decorative veneer back panel can completely avoid the exposure of the MDF substrate, and water will no longer have the opportunity to enter the board from the back of the cabinet, which is a good helper for water and moisture resistance.

Magic weapon 3: Observe more subtleties.

When choosing bathroom furniture, we must pay attention to the small part of the humanized design, which is the key factor in the success or failure of the purchase of furniture.

Magic weapon 4: The internal space should not be ignored.

After a period of use, the bottom plate under the sink cabinet begins to deform due to the condensation left by the water pipes hidden in the cabinet soaking the furniture at the bottom of the cabinet.

Magic weapon five: the installation process should be in place.

When installing bathroom cabinets, it is often necessary to dig holes in the box board, and the multi-functional edge banding rubber strip can tightly wrap the cutting edge of the board, which plays a better role in waterproof and moisture-proof.