The automatic flushing of the smart toilet does not work, and the sensor is no problem

Updated on Toilet 2024-06-30
3 answers
  1. Anonymous users2024-01-24

    It should be a low battery or a malfunctioning solenoid valve.

  2. Anonymous users2024-01-23

    The smart system is broken.

  3. Anonymous users2024-01-22

    Check the water pipes.

Related questions
The button on my toilet flush doesn't work
2 answers2024-06-30

The control valve in the tank is broken, or the zipper is off.

The stool blocked the squat toilet, the flushing didn't work, and the water overflowed, what should
4 answers2024-06-30

The toilet is clogged; Toilet blockage, generally there is a blockage at the toilet trap, the best and easiest way is:: >>>More

The toilet is clogged, and the skin does not work
1 answers2024-06-30

Generally, confirm that you have not fallen into the foreign body and go in a few more times to get through, and if you can't dredge it, you can find the property department to dredge it.

The water level of the toilet tank does not work after being adjusted, it always exceeds that pipe a
2 answers2024-06-30

In your case, the floating raft cannot close the water inlet when it floats to the top - you need to remove the float, or unscrew the entire part on the left side, clean and debug. It really doesn't work, so it needs to be replaced.

The toilet is plugged, and it doesn't work with a toilet stopper, what should I do?
3 answers2024-06-30

Let's call a dedicated master.