-
Anonymous users2024-01-24Clean up the base surface, sweep the floating dust and mud sand, and then brush the waterproof paint on it, generally brush twice, the first time to dry and then brush the second time, and so on after the waterproof paint is dry, make a layer of cement mortar protective layer on it, and then paste the tile to get it. I hope it can help you, the waterproof material should be selected, and the waterproof coating of the Qinglong brand is recommended.
-
Anonymous users2024-01-23First of all, clean the bathroom, pay attention to the dead corners, and brush it yourself, so be careful. Then just brush it directly with a brush, first brush it vertically, and then dry it and brush it horizontally, it's OK, a few points to pay attention to. 1. Pay attention to the sewer pipe carefully, you can brush it several times, and even pour the leftover material directly around the pipe at the end.
This kind of place is prone to water seepage due to uneven painting. 2. Paint 30 cm around the wall, brush 1.8 meters in the shower area, and the width is limited to the shower area. 3. 24-hour closed water test, you must go downstairs to see if there is any water leakage, if not, stick the floor tiles.
That's it.
-
Anonymous users2024-01-22Upstairs is the right solution. It's just that I think the ground should be brushed twice at the end of the day.
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
The well-known waterproof coating brand has Aili, which is an imported product from the United States, which has no peculiar smell and can effectively remove the peculiar smell in the bathroom, antibacterial and mildew-proof, so that the interior can be kept bright and white for a long time. Because there are many water stains in the bathroom, and the air is not well dredged and humid, you can make a mortar waterproofing agent protective layer to increase the strength of the wall and improve the puncture resistance.
Not feasible, it needs to be painted twice.
Bathroom waterproofing process: >>>More
In fact, I suggest that you in the early stage of decorating the bathroom, it is best to find a professional company to make waterproof, although the waterproof coating is enough to have such a waterproof effect, but I think it is better to prevent problems before they happen, and doing more waterproofing will also reduce unnecessary trouble,If the downstairs residents are affected after moving in at a later stage, then all the costs will need to be borne by themselves. >>>More