-
Anonymous users2024-01-24Many owners like to lay wooden floors at home, of course, except for kitchens, bathrooms, and balconies, then such a problem often occurs, after washing in the bathroom, slippers are easy to bring some water, and the water will stay on the wooden floor, for a long time, the wooden floor is not only easy to be dirty, but also easy to soak in water, how to deal with such a problem?
1.Put a doormat outside the bathroom.
Because it is placed outside the bathroom, the doormat placed needs to have, water absorption, non-slip function, carpet doormat, polyester doormat, fabric doormat, etc. can well absorb the moisture brought out by the slippers, if you feel that it is inconvenient to buy a doormat, you can also take a larger rag or useless clothes to spread outside the bathroom, and clean it regularly, but it may not be very beautiful.
2.Put non-slip rubber mats in the bathroom.
Toilet anti-slip mat supermarket can be bought, anti-slip mat can effectively isolate your slippers from direct contact with the ground, reduce the amount of water remaining on the shoes, although the effect will be good, but it is only a certain amount of water to reduce the water stained by the slippers, and there is no effect of placing a door mat with good water absorption outside the toilet.
3.Bring an extra pair of slippers.
If you are a family member, you can prepare an extra pair of slippers and put them in the toilet, go in to change the spare shoes, and change them again when you come out, which can also effectively solve the problem.
-
Anonymous users2024-01-231. Try not to damage the original waterproof layer.
In the newly delivered building, the waterproof layer will generally be made in accordance with the relevant specifications, but in the process of decoration, some bathroom bathing facilities and a variety of water and water pipelines may be re-arranged, so as to destroy the original waterproof layer of the building. Qinglong construction experts suggest that friends who need to decorate should try not to damage the original waterproof layer, and if it is damaged, it must be repaired in time to avoid leakage in the future.
Second, the resurfacing of floor tiles should be waterproof.
If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar, and then do waterproof treatment, so as to avoid leakage caused by uneven thickness of waterproof coating.
3. The wall must be waterproof.
Water will splash on the adjacent wall when bathing in the bathroom, and if it is not waterproofed, the wall will be prone to mildew, so be sure to do a good job of waterproofing the wall before laying wall tiles. Qinglong construction experts suggest that the wall waterproofing should not be less than 30 cm, if it is a non-load-bearing light wall, the entire wall should be waterproofed.
Fourth, the groove of the water pipe in the wall should also be waterproof.
During the construction process, when pipelines and floor drains pass through the floor slab, the waterproof layer around the holes must be carefully constructed. The buried water pipe in the wall should be reasonably arranged, and the water pipe should be made with a groove larger than the pipe diameter, and the plastering in the groove should be smooth, and then the groove should be brushed with polyurethane waterproof coating.
1. Bathroom waterproof construction steps.
Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Hello, now the interior decoration bathroom waterproof can generally be managed for 20 years, and the waterproof mortar can be managed to the second decoration.
Waterproof coating is a kind of film, which is applied to the building with paint and formed by chemical reaction. Through this membrane, the surface of the building is isolated from water, thus playing the role of waterproofing. At present, there are generally two kinds of waterproof coatings on the market, one is polyurethane waterproof coating, and the other is polymer cement-based waterproof coating. >>>More
Step Method Do a good job in the maintenance of the car at the grassroots level Normally, the ground is a cement mortar surface, and there are some special circumstances, such as the pipeline is not buried, and the ground is uneven, so the base should be smooth, the surface should be smoothed and calendered, solid, and there should be no hollowing, sanding, cracking, etc., and the moisture content of the base should meet the construction requirements of waterproof materials, not more than 9%. The flooding slope of the screed should be 2%, and the slope of 5% (1 20) should be wiped out at the root of the pipe against the wall to avoid water accumulation here. Pipe roots and floor drains that protrude from the floor and walls. >>>More
Hello, bathroom waterproofing process: do two layers of waterproofing on the entire bathroom floor, 30 cm on all sides to do waterproofing, and the shower area is 1100*1800.