-
Anonymous users2024-01-24This one can't be moved. Because the toilet bowl on the domestic market is generally open with 2 holes underneath in order to facilitate installation. One is 30cm from the wall and the other is 40cm from the wall.
This means that the maximum distance is only 40cm, which is exactly the same distance as your toilet from the wall. If you want to move back 10 cm, then you need a toilet with a hole distance of 50 cm, but as far as I know, there is no one in China. Hope it helps!
-
Anonymous users2024-01-23Use a toilet shifter, which is available in the home improvement market.
Place the shifter on top of your existing drain and adjust it to the size you need.
-
Anonymous users2024-01-22The sewer pipe with a distance of 40 pits does not move, and I want to install a new toilet. Only one toilet bowl (40 pit pitches) can be replaced, and then a disposer can be installed. Of course, the best situation is to directly install the toilet with a distance of 40 pits, and then don't install the disposer or anything, after all, it is easy to block after installing the disposer, and it may not be deflated, which greatly reduces the flushing capacity of the toilet!
I guess you think it's ugly to leave a slit in the back, to be honest, it's easy to leave a place behind to clean, most people like to put the toilet against the wall, it's actually wrong. On the one hand, it is not conducive to cleaning, and on the other hand, yellow dirt will form at the link between the toilet and the wall, in a word, it is disgusting and difficult to clean.
I just submitted a question.,Someone robbed it.,It's unreasonable.,It seems that typing too slowly is also a failure.。
You can ignore the above answers. I don't know how to pretend to understand and answer all the questions you ask are coming for your high score! I don't know which guy is where, anyway, we haven't seen any "split toilets" in the Wuhan market. I don't know if it's a matter of hundreds of years of money! >>>More
2. Find the original architectural drawings and confirm the pit distance. >>>More
It needs to be measured professionally, or to see if you have a pit distance value in the toilet now.
Generally, the toilet reserved position size is: 38 40CM from the wall, and the installed toilet measurement distance is generally in the toilet fixing screw hole (there are two fixed holes) The position is the middle of the drain
It is recommended that you use the domestic brand Koch smart foam sanitary ware that does not splash water and has no smelly new products with good quality.