If you want to change the toilet, how to confirm the current pit distance without dismantling the cu

2. Find the original architectural drawings and confirm the pit distance.

3. Find a toilet installation master to confirm the pit distance.

4. Find a property management company to confirm the pit distance.

2. Find the original architectural drawings and confirm the pit distance.

3. Find a toilet installation master to confirm the pit distance.

4. Find a property management company to confirm the pit distance.

How to measure. The toilet is installed as long as the pit distance is spaced.

The pit distance is the wall against the back of the toilet, measured to the center point of the drain, how many centimeters is the pit distance, (you can use a ruler to measure how many centimeters).

2 cm is reserved for those who do not have wall tiles.

How to measure the distance between the toilet pit.

1. First of all, the toilet is divided into two kinds of water according to the direction of the row, the horizontal row can only be installed with a straight toilet, and the ground row can choose to flush or siphon, depending on the pipe structure.

2. The pit spacing of the horizontal row is generally 180mm, and the pit spacing of the ground row is more complicated, with 200mm, 305mm, 400mm, 580mm and so on.

3. In China, most families will choose floor toilets, generally speaking, ordinary families install floor toilet pit spacing is 300mm or 400mm, in order to facilitate installation, about 20mm will be reserved in the operation. If the error is between 10mm, it is relatively normal, and most of them can be installed smoothly.

Toilet bowl is cleaned daily.

1. The user cleans the toilet at least once a week.

2. If the water source of the user's location is hard water, the outlet hole must be kept clean.

3. Frequent turning of the toilet seat will cause the fastening washer to loosen, please tighten the cover nut.

4. Do not knock or step on the toilet.

5. The toilet seat should be cleaned frequently to keep the cover neat and tidy.

The answer can be measured from the sewer, go to the upstairs neighbor's bathroom, and observe the 90-degree distance from the center of the ceiling and the sewer pipe to the wall, and you can know the pit distance of your toilet.

If you want to know the pit distance without dismantling the toilet, you can follow the following two methods: if you live downstairs, you can remove the ceiling and measure the position of the toilet sewer pipe from the center of the toilet pipe to the wall in the upstairs bathroom. If you live on the top floor, you can go to the downstairs ceiling to see the location of your own bathroom, that is, you can measure the distance of the toilet pit you want.

If not, take a look at the image below:

The distance from the toilet base to the flush building.

The hole spacing is divided into 250, 300, 400 depending on where you are and the distance from the wall.