The toilet drain is blocked, and two instant noodle forks were mistakenly thrown in yesterday, and n

Updated on Toilet 2024-06-11
17 answers
  1. Anonymous users2024-01-24

    It is best to remove the fork and find it out, the bottom of the toilet bowl has rubber pads, and if you use a pipe dredger, it is easy to damage the connection and cause water seepage. If it's hard to dismantle, try a large hook, tie the hook to a small piece of styrofoam, flush it back and try it!

  2. Anonymous users2024-01-23

    Use a leather puff to see if you can suck it out. Is there a tool to poke the water pipe?If you're in a hurry, find a worker who can unclog the water pipes first. If you are not in a hurry, you can buy a tool to dredge the water pipes yourself, which is economical.

  3. Anonymous users2024-01-22

    You need to uncover the toilet, which is usually stuck on the toilet flange!After that, buy a flange and install it, test the water, no blockage or leakage, and seal it with glass glue.

  4. Anonymous users2024-01-21

    Find a stiff wire and see if you can get the fork up, it's no longer the way. It is useful, please praise thank you!

  5. Anonymous users2024-01-20

    Call for help. Call a professional who unclogs the toilet drain. If it helps you, please give a good review. Thank you.

  6. Anonymous users2024-01-19

    Wear rubber gloves and try to pick it, and then you can dredge it with a snake-shaped dredging tool.

  7. Anonymous users2024-01-18

    The general pull-out plug will definitely not solve the problem. Find a professional dredge worker, it's not a matter of doing it yourself. You don't have professional tools.

  8. Anonymous users2024-01-17

    I went to the supermarket or grocery store to buy a toilet thing, and I thought that I could get the more expensive one that could be compressed by air, and the ordinary one that cost 5 yuan couldn't do it, so it was useless.

  9. Anonymous users2024-01-16

    It is recommended to go to the hardware store and hire a sewer master to repair it, which costs some money.

  10. Anonymous users2024-01-15

    This one needs to be repaired by a repairman.

  11. Anonymous users2024-01-14

    Go to the grocery store and buy a draw.

  12. Anonymous users2024-01-13

    You're so talented!This kind of thing is not easy to take out, and most of them are stuck. You can't pull it out with a pisset, so it's best to find a property maintenance worker to investigate on the spot!

  13. Anonymous users2024-01-12

    Hard steel wire, provided that it is not deep and can be reached, and the hard steel wire is bent into a groove with a vise.

  14. Anonymous users2024-01-11

    The thin pipe is easy, and the iron sewer of the old house is not easy to block, and some people may still block it before. So the fork was immediately blocked.

  15. Anonymous users2024-01-10

    Go to the bigger supermarkets that sell things that go down the drain.

  16. Anonymous users2024-01-09

    Try it with a pickle!If it doesn't work, report for repair.

  17. Anonymous users2024-01-08

    Go buy one that turns the other, anyway, you go to the grocery store and say you want to go to the toilet.

Related questions
2 answers2024-06-11

The two holes in the back of the toilet are not plugged, and the design is useful, because it will affect the pumping after being plugged.

4 answers2024-06-11

The effect is the same, the two ports are just to be able to discharge to one more place. If it is a straight-flush toilet, it uses the large thrust formed by the compressed air, and the flushing speed is fast, the punch is large, and the sewage is strong, the speed is fast, and the water is used less, and there is no leakage. Because the direct flush type uses the instantaneous strong kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud. >>>More

4 answers2024-06-11

Cut the hole with tiles to the size of the hole, and then seal it with silicone, first put the toilet away, draw a good line, then take it away, put on the silicone, and then put the toilet on it, but don't use it before the glue is dry.

3 answers2024-06-11

The best way is to leave it dry for 24 hours, but if it's already flushed, don't worry too much, and if there is no leakage or smell for the past two days, there will be no problem.

7 answers2024-06-11

<> adjust the water level of the water tank, that is, how much the water tank can be stored.