Is there anything to pay attention to when the ceiling modeling living room is simple and generous?

1. Determine the height of the ceiling.

Generally speaking, accurate measurement of the height of the ceiling is the first step in the process of decorating the ceiling. The specific operation method is to prepare a tape measure first, and then mark the high level line of the house, to confirm the elevation by vertical measurement, and then use the elastic line to pop the keel from the position of the roof, after completing this step, do not forget to use this method to determine the elevation level line of the ceiling area at the position of the wall.

2. Install the main keel boom.

After the floor and wall elevation are completed, the next step in the process of decorating the ceiling is the installation of the main keel boom. If the position of the ceiling elevation line and the main keel has been determined, the elevation operation of the lower head of the boom can be carried out, and the implementation is also very simple, one end of the boltless wire boom can be fixed below the floor slab in the main keel and the hanging spacing by expanding the bolt. One thing to note here is that professional and qualified booms are generally required to be made of 8 mm flat steel or 6 meters of steel bar materials, so you must remember to understand the material specifications of the boom from the merchant when purchasing.

3. Complete the nut assembly.

This step seems simple, but it is a very critical part of the process of decorating the ceiling. Because if the nut is not installed properly, it is likely to cause safety hazards. At the time of installation, the hanging materials should be accurately installed in the position of the main keel, and then they should be threaded into the corresponding bolts according to the specific position of the binning line, to ensure that the nuts are tightened, and successively connected with the main keel and other connecting materials, and then pull the line again to check whether the elevation position is accurate, if otherwise adjust, after adjustment, fix the main keel and related materials.

>4. Install the gusset plate.

After the main keel and each part of the nut are configured, you can carry out the gusset installation process in the process of decorating the ceiling. The most important thing to remind everyone here is that if you want to have a compact and seamless effect, you must be careful and undirectionally folded in the small hole position at the fold of the gusset plate must be inserted into the triangular bone seam, and after insertion, you can press it slightly.

>5. Install the electrical module.

The process of decorating the ceiling is basically over here, and you only need to purchase electrical modules according to your favorite type.

1. It is best to choose light steel keel installation in the case of both wooden keel and light steel keel, because the expansion and contraction range of wooden keel is relatively large, which will make the overall structure easy to deform, and the expansion joint should be paid great attention to during design and construction.

2. Each joint of the keel should be left with an expansion joint, and the seam should be poured into a 45-degree angle, whether it is the installation of light steel keel or wood keel installation, their spacing must be standardized, to ensure that the bearing capacity of each self-tapping nail is close, otherwise it is easy to have a side lock reaction to make the structure lose stability.

3. If the space of your house is wide and the floor height is relatively high, then there can be many types of ceiling types to choose from, such as gypsum sound-absorbing panel ceilings, fiberglass wool ceilings, plywood ceilings, etc., which are very suitable for both good decorative effects and sound-absorbing functions.

What should you pay attention to when you do the ceiling, the master of the ceiling will generally tell you, for example, the edge of the gypsum ceiling is seamed, if you install the gypsum ceiling at home, you can pay attention to it, the home is the new gypsum material of the AIA integrated ceiling, the seamless side crane used here is relatively beautiful, not easy to crack by moisture.

I don't understand this aspect of design at all, where do consumers need to understand so much, when buying AIA integrated ceiling, the design and installation are arranged in the store, it is very simple, the selection of materials are certified, and there has been no quality problem.