What to do if the toilet seat is broken

In order to ensure that the toilet can be used well, it is necessary to innovate the bad toilet, but the toilet is only a broken toilet seat, and it is not necessary to replace it entirely, so it is very important to master the toilet seat replacement method.

When replacing the toilet seat, you can replace it by removing the fixing bolt on the back of the toilet bowl and operating in the opposite direction when installing. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Different styles of toilet lid installation are also different, in general, the bottom end of the toilet lid is connected to the position of the toilet, which is screwed up behind it, as long as you reach down to find it, unscrew the screws on both sides to take off the whole cover, very simple.

Go buy a toilet lid to replace it, usually there are two plastic pieces under the tank to lock the toilet seat, you can grope to pull the toilet lid down, and then take it to the hardware plumbing store to buy a similar shape to it back and replace it, if you won't change it and ask me a question.

Just go to a large supermarket or building materials market and put one on it.

See if the merchant has bought a similar one.