-
Anonymous users2024-01-24Buy a little marble glue and get it, and it won't leak for a hundred years.
-
Anonymous users2024-01-23Hot melt adhesive is not possible. You can find a professional to fix it.
-
Anonymous users2024-01-22I attach it with agricultural machinery glue or AB glue and change it.
1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More
The toilet plays a very important social role in daily life, although it is not a lofty role, but without the toilet, you have to live and you can't continue. 1.First of all, open the toilet tank, and let's see what level the scoop inside the tank is at when it is full. >>>More
Hello, you can use glass glue to apply to the crack position, stop using it for more than 24 hours. Before applying glass glue, you need to close the water inlet valve of the water tank one day in advance, and the application position should be dry and there should be no moisture. Apply a little wider. >>>More
4 "It's bad at the place, it's good to replace one, if it's a new one, you can find a dealer, if it's too long, turn off the triangle valve, they will provide door-to-door repair, that is, something connected to the water.
, the water inlet valve does not enter the water (1), check whether the tap water pressure is too low. (2) Check whether the filter screen of the inlet valve is blocked by debris. (3) Open the inlet valve cover and check the sealing ring in the inlet valve body.