-
Anonymous users2024-01-24What size should I choose for the floor tiles in the bathroom? This choice depends on the area in which the person wants to tile and the choice of different tiles. How to paste the floor tiles in the bathroom?
This problem involves two methods: the cross positioning method and the dry paste method. The water vapor in the bathroom is relatively large, so if the floor has a good decoration, it can make people's lives more comfortable.
1.First of all, measure the size of the tiles to be applied to the floor. If you need to order tiles, first choose the tiles in the store, then measure the size of the house and calculate the number of bricks you need based on the size of the tiles you choose.
2.Common specifications of glazed tiles: 152 152 mm (square meters), 200 200 mm (25 square meters), 200 300 mm (square meters); Ordinary brick specifications:
300 300 mm (pieces square meters), 400 400 mm (pieces square meters), 600 600 mm (pieces square meters), 800 800 mm (pieces square meters), etc.; Common specifications of polished tiles: 400 400 mm (piece square meter), 600 600 mm (piece square meter), 800 800 mm (piece square meter), 1000 1000 mm (1 piece square meter) and so on.
1.How to stick the cross positioning method of bathroom floor tiles. This method has a great improvement in construction, which can improve the joint accuracy when the floor tile is paved and simplify the construction process.
Bathroom tiles with this method of application can be selected in different sizes and laid according to a certain combination. Due to the different sizes and combinations of tiles, the tiles will change and the order will also change, making the effect more vivid.
2.How to paste the bathroom floor tiles dryly. This pavement method does not need to use muddy water, as long as the tile binder can be used, which greatly surpasses the traditional mortar cement, greatly reduces the construction time, and is more suitable for the toilet with a small working area and an unsatisfactory working environment.
There are many types of ceramic tiles. When people are buying, it will be more appropriate to choose according to their own needs. How to paste the floor tiles in the bathroom? Of course, choosing professionals to carry out the construction can better ensure the effect.
During the actual construction, most of the cases are the top wall, which is convenient for construction, and the bricks do not need to be cut (the whole brick of the wall bricks). >>>More
In the process of decorating the bathroom, special attention should be paid to the purchase of bathroom floor tiles, because the cleaning of bathroom floor tiles is a very troublesome thing, but now there are many colors and types of tiles sold on the market, so how to choose the floor tiles in the health mausoleum? What are the precautions for purchasing bathroom floor tiles? >>>More
Floor drain is mainly anti-odor, while deep-water floor drain is a typical representative of anti-odor. The deep-water floor drain is designed with an anti-odor device in the sewer pipe, so as to prolong the evaporation time of the water seal and improve the anti-odor ability of the water seal. Here is a warm tip, I plan to choose a deep-water floor drain depth of more than 12 cm, then try not to change the position of the sewer pipe, after the change the depth becomes shallow, you can not install an anti-odor floor drain.
Is the sewer pipe in your bathroom pre-set? Where are all the sewage risers located? If not, you need to set it up completely, and if you already have a sewer pipe, then arrange your bathroom equipment for the location of the sewer riser. >>>More
Two to three squares is sufficient, unless you're going to use a bathtub, then you'll have to make it bigger.