-
It is necessary to supplement the questions in detail, and it is not clear to see;
If the cement mortar surface is not very smooth and there are too many burrs, a small area can be smoothed with a portable angle grinder + diamond small grinding disc; If the area is large, you can consider terrazzo grinding.
-
Under normal circumstances, when the bathroom is waterproof, the ground needs to be leveled and then cleaned before being waterproof. Whether you use mortar waterproofing agent or waterproof paint for waterproofing, the ground should be flat after doing it, and then tiled. Now it is recommended that there are two ways to deal with uneven ground, one is to use mortar waterproofing agent to do waterproofing again, and the other is to level the ground when using mortar to paste tiles.
It is not recommended to use mechanical tools to sand on the waterproofing layer, as this may damage the waterproofing layer.
Hello subject, there are generally two reasons for the occurrence of this situation: >>>More
1. Clean the ground, 180 cm from the ground to the wall, there must be no dust. >>>More
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More
Dig the best permeable waterproofing can be done by yourself. >>>More
The bathroom can be waterproofed without tiles, but there must be cement mortar on the waterproof layer, and there must be a certain thickness, otherwise the waterproof layer will be damaged! Let me share with you the construction of bathroom waterproofing: >>>More