-
Anonymous users2024-01-24No problem, as long as the specifications of the live wire and the zero line are the same! Because the lines for each of your rooms are independent! If you change the fire-ground wire in the kitchen, it won't affect the other rooms!
In fact, the incoming wires of this row of switches under your house are all from the same leakage protector, so that the wiring is just a section of the incoming wire, and there is no potential safety hazard!
Remove your leaky outlet panel with a screwdriver. See the back box. Then use quick-drying cement and add a little fiber to stir and plug the leaking eye hole of the bottom box. Then use glass glue to seal the outlet of the wire. and other ventilated crevices. That's it. >>>More
Is it okay to use 220V for household electricity, 4 for live wire, and zero for neutral wire? Don't do this with wiring at home.
Swapping can solve temporary problems. Treat the symptoms but not the root cause. It's also not safe. >>>More
Don't deal with it, if the switch controls the live wire, when the switch is turned on, both wires will be electrified. The two wires of the switch, one is the live wire, and the other is the control wire, which is not the neutral line.
The power of kitchen appliances is getting bigger and bigger, more and more, and the probability of using it at the same time is also greatly increased, so it is advisable to increase the wiring appropriately, and the bathroom (electric heating) and kitchen (high-power multi-electrical appliances) wire is best to use 6 square copper wires, and the sharp right-angle elbow should be avoided at the turn of the wiring.