-
Anonymous users2024-01-24Toilet leak bai repair method steps du:
One: First open the water tank of the horse bucket and see that the water tank is full of water
At that time, the water scoop of the internal version is on the level of a right. If the water inside is full and the tank is still flooding, then there must be a leak coming out.
Two: use water to pull the card position of the water scoop up and down, watch the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed.
Three: Remember to press the position of the water scoop a little, not too high. If you don't know how to disassemble, you can directly put dry water in the water tank, clean it with dish soap and washing powder.
Four: If you can continue to use it, if not, you need to replace it. Check the connection of the stainless steel hose on the outside of the water tank, at the location of the water tank, to see if it is not tightened or if the rubber pad inside is aging and leaking. This must be ascertained.
Five: If the internal equipment is fine, then you also need to check whether the toilet tank has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.
-
Anonymous users2024-01-23The toto toilet in my house kept ticking, and then I pulled the ball down in the water tank, but the water was not closed tightly. You try.
-
Anonymous users2024-01-22Call directly to the TOTO bathroom shop and ask them to send someone to come and maintain it for you.
-
Anonymous users2024-01-21Can you be specific? Is it a leak in the soft connection pipe, or is it a leak where the toilet is attached to the floor?
( ) Check whether the filter screen of the inlet valve is blocked by debris. >>>More
Generally speaking, from dozens to hundreds, ranging prices, mainly depends on how to maintain, but the cost of debugging and maintenance is not high, if you replace the internal accessories, it is not easy to say, the price of each brand is different, its own price is high, the maintenance cost is high, and the difference between regions is different
First, open the toilet tank. Let's take a look at what the water level is when the spoon inside the tank is filled with water. If the water inside is full and the tank is still filling, it must be leaking. >>>More
Flush toilet leaking, right? Look at the leakage.
If the inlet pipe is leaking, it will cost more than ten to twenty yuan to replace one. >>>More
The sealing rubber ring is damaged, there is always a sealing rubber ring when connecting the water tank, this sealing rubber ring is generally at the interface position of the water pipe, directly close the main water valve, and then unscrew the leaking interface position, and directly replace a sealing rubber ring.