If part of the master bedroom in the floor plan is a bathroom, then the master bedroom is counted

Updated on Bathroom 2024-06-05
2 answers
  1. Anonymous users2024-01-24

    1. The inner guard is in the master room, of course, the size of the inner guard should be counted in the master room.

    2. The balcony has a north and south respectively, and the location is shown in the red box in the figure below 3, and the floor height is the height difference between the current position and the same position on the previous floor. It is generally obtained by adding the net height to the thickness of the floor slab.

    The clear height is the size of the flat top and bottom of the floor surface at the current location.

  2. Anonymous users2024-01-23

    The bottom two A-7 are balconies, and the dimensions of the bathrooms should be counted in the building dimensions. Floor height is the size between the ground level of your room and the ground level of your upstairs.

Related questions
What contours can be seen in the floor plan of 1 100. The convex lines of the balcony are:
2 answers2024-06-05

In the 1:100 building plan, the actual length of 1 meter is only 1 cm in the drawing, and some of the outlines that are actually only a few centimeters thick are less than 1 mm in the drawing, which cannot be clearly represented in 1:100. >>>More

What door does MDC represent in the floor plan (the door is in the toilet area).
3 answers2024-06-05

In the construction drawings of the building plan, the first letter of the Chinese pinyin of the component is usually used for abbreviation, for example, the door is represented by "M", and the window is used"C"In the floor plan, MDC is used to represent doors and windows. >>>More

In the floor plan, how to mark the sunken bathroom?
3 answers2024-06-05

Relative to the floor elevation, the table is positive, and the one below the floor is negative.

The interior door is not done in the floor plan of the building part of the construction drawing, an
1 answers2024-06-05

Doors and windows are the main components of the building, and the main components of the building are not constructed, so it is not finished, and the unfinished project does not meet the conditions for the production of as-built drawings! >>>More

In the Tianzheng building, how to draw a railing on the balcony of the building plan
3 answers2024-06-05

In fact, there is no need to use Tianzheng, it is OK to represent the direct line, if you must use Tianzheng to draw the railing of the floor plan, you can use Tianzheng [Staircase Other] menu to draw the balcony, after the balcony is drawn, the plane shows two parallel lines, in fact, it is the railing projection, you use the 3DO command to view, color vision style, concept, and find that it has been painted with the railing.