How to plug the smell from the toilet hole in the bathroom

Updated on Bathroom 2024-06-23
2 answers
  1. Anonymous users2024-01-24

    1. If all the blockages can't solve the problem, you still have to see if it's caused by poor pipes, and the toilet must be cleaned frequently.

  2. Anonymous users2024-01-23

    Go to the supermarket and buy a plastic cover for the opening of the squatting toilet. It opens when flushing and closes without a flow of water.

Related questions
11 answers2024-06-23

The smell in the sewer is caused by bacteria, and I recommend that you rinse it with white vinegar as a cleaning agent. You can put white vinegar into the drain, starting 2 times a day, then until the taste fades, once a day, and trust me it won't be long before you solve the current problem. The price of white vinegar is 3 yuan, and you will find it a good thing that is both practical and affordable.

2 answers2024-06-23

There are many ways to use this method, depending on how skillfully you apply it.

1 answers2024-06-23

The squatting pit is not equipped with a water trap.

Or buy a re-install one with a trap, but the pit will be higher than the ground. >>>More

1 answers2024-06-23

Generally, if the water of the mini car is not clean, more or less part of it will be left. The lower bottom of the water tank generally has a water discharge switch, which can be unscrewed. Some engines also have a water drain switch on the lower left side of the fuselage, (usually a 14 nut). >>>More

14 answers2024-06-23

The sockets we use indoors are grounded wires, because there is no grounding wire, it is impossible to avoid lightning, when installing the water heater, there is a grounding wire on the water heater, the grounding wire, the grounding wire, the grounding wire can be grounded, and the socket can be used normally.