-
Anonymous users2024-01-243 all bathtub drains are not a drain pipe can be retracted very long, you plug the outlet of the bathtub drain into the drain of your bathroom, no need to hit the floor trouble, if the manufacturer's original bathtub drain pipe is not long enough, you can replace a longer inexpensive, 2 3 ten yuan only.
-
Anonymous users2024-01-23It can be connected to an external tube and connected to the water.
-
Anonymous users2024-01-22If you have obsessive-compulsive disorder, you knock it, who cares about you. Or maybe it's okay to go with an open tube and add decoration, if it doesn't trip people up.
This close friend, the weather in Northeast China is extremely cold, especially in Heilongjiang Province, so the rural toilet is in a natural state, and the embedded size of the drainage pipe must be less than one meter so that it will not freeze.
There should be on the sample drawing, if there is really not, then there are two ways, 1, if there is just no distance from the wall, then the sitting can be positioned by 400mm from the wall, the sewage pipe and the main riser are positioned by 100mm from the wall, and the floor drain can also be positioned by 100mm, 2, if there is no positioning size, it is recommended that you go to the supervision, which is a drawing problem, no matter what the situation should be communicated with the supervisor, so that the problem can be solved and not responsible.
The size of the bathtub is not only related to the size of the space, but also directly related to the functional design of the bathtub. The length of the general bathtub varies from meters to meters, and the depth is between 50 and 70 centimeters. The length of the bathtub below the meter, the depth is often deeper than the general bathtub, about 70 cm, this is often said to be a bidet bathtub, due to the small area of the bottom of the bath, this bathtub is easier to stand than the general bathtub, saving space and not affecting the comfort of use.
The house is a private room is easy to do, all the sewage pipes directly through the floor, go U-shaped and then lead outward, if the downstairs feels not good-looking, you can do the ceiling plus gusset. Water pipes in do not go to the ground. Dig a groove on the wall a little above the ground.
Buried casing, there is a finished casing, the later stage directly takes over, no finished product is used to use a larger pipe into a section, can not bury the pipe, I am a professional hydropower. I don't know how to ask again.