Urgent anti theft door insurance stuck, the key can t open the door, what should I do, I can t get o

Someone in it is a stupid calendar Phillips screw to remove the panel stopper. After dismantling the panel, use a tool (a 90-degree bent iron wire) to lift and pull the second one on the left side of the figure below. If it doesn't work, you can use the hand vibration to hit the door panel and try again.

> Introduction: The full name of the anti-theft door is "anti-theft security door". It combines anti-theft and security performance.

According to the provisions of the "General Technical Conditions for Anti-theft Security Doors", qualified security doors cannot be pried open within 15 minutes by using ordinary hand tools such as chisels, screwdrivers, crowbars and portable power tools such as hand drills, or open an opening of 615 square centimeters on the door leaf, or open an opening of 38 square millimeters in the semicircle of 150 square millimeters of the locking infiltration point.

And the locks used on the anti-theft door must be a special lock for the anti-theft door with anti-drilling function that has been tested and qualified by the testing center of the Ministry of Public Security. The anti-theft door can be made of different materials, but only the door that meets the standard test and receives the safety product production certificate can be called an anti-theft door.

Someone put a Phillips screw inside to remove the panel. After dismantling the panel, use a tool (a 90-degree bent iron wire) to lift and pull the second one on the left side of the figure below. If it doesn't work, you can use the hand vibration to hit the door panel and try again.

> Introduction: The full name of the anti-theft door is "anti-theft security door". It combines anti-theft and security performance.

According to the provisions of the "General Technical Conditions for Anti-theft Security Doors", qualified security doors cannot be pried open within 15 minutes by using ordinary hand tools such as chisels, screwdrivers, crowbars and portable power tools such as hand drills, or open an opening of 615 square centimeters on the door leaf, or open an opening of 38 square millimeters within a semicircle of 150 square millimeters of locking points.

And the locks used on the anti-theft door must be a special lock for the anti-theft door with anti-drilling function that has been tested and qualified by the testing center of the Ministry of Public Security. The anti-theft door can be made of different materials, but only the door that meets the standard test and receives the safety product production certificate can be called an anti-theft door.

Is it the one used to reverse the lock, try two more twists. If you can't twist it, you can remove the handle and find a flathead screwdriver to insert it and screw it, which should solve the problem.

Still ask here, go straight to 110.