The security door inside the key cannot be opened

Updated on Security door 2024-02-29
1 answers
  1. Anonymous users2024-01-23

    Is it because the key is inserted in the security door and the door can't be opened?

    The general anti-theft door lock is divided into two parts, and there is basically no way to remove the key if the key is inserted inside. You can try to open it with a tool from the position of the door mirror (there are professional lockpickers for specific public tools), but this method is only limited to quick lock doors, and the door is not locked with a key.

    The second method is to drill the lock cylinder with an electric drill, specifically to destroy the cap of the lock cylinder first, and then find the lock cylinder, first use the M4 drill bit to attract the eye, and then take the M8 drill bit, drill to the end can be taken out, the position is of course the bottom of the lock cylinder;

    Third, if you can't do it yourself, it's best to find a professional to burn dry, the cost is generally about 50 yuan, not too expensive.

Related questions
10 answers2024-02-29

The anti-theft door is generally a lock cylinder that can only hold a key at the same time, you have a key inserted inside, and the outside must not be opened, now you can only find a way to pull out the key inside or knock it out, or find a lock company to open the door.

3 answers2024-02-29

1. You can use the key to count the key outside and talk about it twice, so that you can push the key out inside, remember not to choose to hit it with a hammer or a brick. >>>More

11 answers2024-02-29

The details are as follows:

First of all, take the key to open the anti-theft door and push it a few times, if the key in the door is horizontal, the key may come out; If you still can't open it, find a professional locksmith to help. >>>More

4 answers2024-02-29

It is possible that water vapor enters the keyhole, sticks to more water vapor, freezes, and causes the keycore to deform, it is best to soak the key with hot water, and then open it, and remember to go home and get a hair dryer to blow the keyhole after opening.

2 answers2024-02-29

1. Use sandpaper to grind off the key head by two or three millimeters, of course, the grinding wheel can also be used, which is also more convenient. >>>More